Also, I've noticed that the Rock64 and the Raspberry Pi have the same GPIO layout. Except the Raspberry pi calls pin #19 GPIO 10, pin #21 GPIO 9 and pin #23 GPIO 11. Where as the Rock64's pin #19 is GPIO3_A1, pin #21 GPIO_A2 and pin #23 GPIO3_A0.
Could a display such as the one linked below work with the rock64's pi-2 GPIO bus? I could care less about the touch screen capabilities. As long as the screen works as intended I'm a happy camper.
https://www.amazon.com/dp/B07L9XM11M
User documentation for the display pinout can be found at the link below on page 2, in the PDF named 5inch_HDMI_Display_User_Manual.
https://mega.nz/folder/rIEH1J4Z#gEExHaWL...r/qQVi3LZZ
Could a display such as the one linked below work with the rock64's pi-2 GPIO bus? I could care less about the touch screen capabilities. As long as the screen works as intended I'm a happy camper.
https://www.amazon.com/dp/B07L9XM11M
User documentation for the display pinout can be found at the link below on page 2, in the PDF named 5inch_HDMI_Display_User_Manual.
https://mega.nz/folder/rIEH1J4Z#gEExHaWL...r/qQVi3LZZ
