Rock64 as a router (OpenWRT,etc)
#1
Hello. Long time lurker, first time poster here. A while ago I decided to use Pine64 boards for a few projects I have, however choosing the board for one of them is giving me a headache.

I need a board to use as a router/bridge, to grab internet from Wi-Fi and pass it via cable to an ethernet switch. Ideally, it would be low power, reasonably priced, minimum firmware blobs and compatible with an OS like OpenWRT (in order to have a web interface for making configurations).

Here's the scheme:

(((Wi-Fi)))   (((ext.Antenna ----- USB_WiFi_card ----- SBC ---- RJ45 ----- switch ----- (...)other_devices


I immediately set my eye on a Rock64 1GB for the low price, USB3 and because it's a great board for reusing as a media center/TV box if needed. However, I realized today that there is no OpenWRT or similar OS available for it.

I checked compatible boards in OpenWRT site and from Pine64 they have PINE A64+ and RockPro64. RockPro is great, but overkill for the purpose (probably more power hungry and more than double the price), and A64+ doesn't have USB3.0 and seams to have less value has a media box.

Searching through the hardware list, I also found the many Nano Pi, from friendlyarm.com . They all have compatibility with OpenWRT (or their own fork called friendlyWRT), use Allwinner or Rockchip SoCs and are not too expensive. I'd rather buy from pine, but I'm considering the option.

1. One of the Nano Pi 's uses an RK3328, similarly to the Rock64. Couldn't the firmware be used to build friendlyWRT for Rock64? Perhaps even without modifications? Huh  (link)

2. Is it me or are all these Nano Pi wasting their potential? They seam to have SoCs with capable GPUs, but no video-out whatsoever. The GPU just sits there idle and unusable?

3. Has anyone managed to use Rock64 as a router in some way?

4. Do you think the PINE A64+ 1GB would be better for the job?


Thanks in advance for any help
  Reply
#2
Already done https://forum.pine64.org/showthread.php?tid=11012
  Reply
#3
(11-21-2020, 09:38 PM)bob-anon Wrote: Hello. Long time lurker, first time poster here. A while ago I decided to use Pine64 boards for a few projects I have, however choosing the board for one of them is giving me a headache.

I need a board to use as a router/bridge, to grab internet from Wi-Fi and pass it via cable to an ethernet switch. Ideally, it would be low power, reasonably priced, minimum firmware blobs and compatible with an OS like OpenWRT (in order to have a web interface for making configurations).

Here's the scheme:

(((Wi-Fi)))   (((ext.Antenna ----- USB_WiFi_card ----- SBC ---- RJ45 ----- switch ----- (...)other_devices


I immediately set my eye on a Rock64 1GB for the low price, USB3 and because it's a great board for reusing as a media center/TV box if needed. However, I realized today that there is no OpenWRT or similar OS available for it.

I checked compatible boards in OpenWRT site and from Pine64 they have PINE A64+ and RockPro64. RockPro is great, but overkill for the purpose (probably more power hungry and more than double the price), and A64+ doesn't have USB3.0 and seams to have less value has a media box.

Searching through the hardware list, I also found the many Nano Pi, from friendlyarm.com . They all have compatibility with OpenWRT (or their own fork called friendlyWRT), use Allwinner or Rockchip SoCs and are not too expensive. I'd rather buy from pine, but I'm considering the option.

1. One of the Nano Pi 's uses an RK3328, similarly to the Rock64. Couldn't the firmware be used to build friendlyWRT for Rock64? Perhaps even without modifications? Huh  (link)

2. Is it me or are all these Nano Pi wasting their potential? They seam to have SoCs with capable GPUs, but no video-out whatsoever. The GPU just sits there idle and unusable?

3. Has anyone managed to use Rock64 as a router in some way?

4. Do you think the PINE A64+ 1GB would be better for the job?


Thanks in advance for any help

i'm also interested in building a router with pine64. I currently have a NanoPi R1 running as an OpenWRT router. It works great but I'm worried about dealing with a Chinese company.

commercial routers are terrible. it would be great if there was a ready to go firmware for Rock64 or something.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  lost eletronic component rock64 marvin1986 1 213 06-01-2021, 06:27 PM
Last Post: 8bit
Shocked Rock64 - Reboots after few minutes addezai 2 321 04-22-2021, 07:03 PM
Last Post: addezai
  Python GPIO Library for the Rock64 (R64.GPIO) Leapo 36 36,999 04-17-2021, 08:59 AM
Last Post: theophile
Question Hardware issues with Rock64 grobbs 10 1,271 04-08-2021, 05:24 AM
Last Post: t4_4t
  Rock64 Long Term stability ramprasad 4 1,714 03-16-2021, 07:23 PM
Last Post: Rocklobster
  Rock64 No Audio - Solved wbecks 11 14,926 03-15-2021, 03:15 PM
Last Post: lowry
  Safest way to send shutdown signal to headless Rock64 SMB server? bmurphr1 3 1,036 03-14-2021, 06:01 PM
Last Post: clach04
  Rock64 enable 1-wire to read DS18B20 or Dallas temperature sensor Perry 2 1,185 02-12-2021, 08:02 PM
Last Post: Perry
  Will Mobian Run On Rock64? Porcupine 1 591 01-13-2021, 12:39 PM
Last Post: tophneal
  Rock64 v2 as Openmediavault server - buffers / shutdown problems helpmerock 2 1,028 12-29-2020, 09:46 AM
Last Post: helpmerock

Forum Jump:


Users browsing this thread: 1 Guest(s)