01-06-2021, 07:49 AM
(This post was last modified: 01-06-2021, 07:53 AM by nightranger73.)
You need to install bsp u-boot on EMMC but be sure to backup your /boot/extlinux/extlinux.conf before you install the old u-boot and restore it soon after otherwise manjaro won't boot anymore.
You need to do that on emmc because that's the first place where the pbp looks for u-boot then the u-boot will look for sd,usb or emmc and boot the system.
use pacman to install the uboot so you'll see in pacman's output the dd commands to issue as root (or with sudo). You need to flash 3 files for uboot-bsp
You need to do that on emmc because that's the first place where the pbp looks for u-boot then the u-boot will look for sd,usb or emmc and boot the system.
use pacman to install the uboot so you'll see in pacman's output the dd commands to issue as root (or with sudo). You need to flash 3 files for uboot-bsp
