Slarm64 on PinePhone [Unofficial Slackware ARM - 64 bit]

[mara]

first option without SCP for testing
README.TXT

slarm64-current-aarch64-xfce-rootfs-20201115-5.9.12-pinephone-build-20201206.img.zst
slarm64-current-aarch64-xfce-rootfs-20201115-5.9.12-pinephone-build-20201206.img.zst.sha256

@mara Sorry it took me so many months to test this image.  I've been buried with other projects.

Unfortunately the supplied uboot doesn't seem to work on my PinePhone. I just get a black screen with no LED lit. The one I took from Manjaro which uses an extlinux.conf file works.

It's very hard to debug as there's no output unless I can setup a serial link. Later I can try and swap in different boot files to see if the rest of the image works.

This is what I did, anyway:

Code:

# dd if=slarm64-current-aarch64-xfce-rootfs-20201115-5.9.12-pinephone-build-20201206.img of=/dev/mmcblk0 bs=512K status=progress

# dd if=u-boot-sunxi-with-spl.bin of=/dev/mmcblk0 bs=1024 seek=8

thank @acid andy , I updated the build config, I will update the image later