Won't boot with 2.5GBe PCIe adaptor connected
#1
Hi,
I'm able to plug in a TP-Link Gigabit adapter and the board boots fine, but with a Diewu 2.5 gig adapter I get a hang at "booting Linux". I'm not able to get any other output (although assistance with earlyprintk/earlycon parameters is welcome)

The adapter is this one: https://www.aliexpress.com/item/4000150903887.html

I've tried both with the "stock" 2017 u-boot and with a newer 2020.07 based one, both with Armbian and ayufan images to no avail.
  Reply
#2
hotplug or boot with blacklisted module and see what happens during insertion
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Won't boot with SATA card rjzak 2 147 10-18-2020, 01:44 PM
Last Post: rjzak
  RockPro64 pcie Gpu Davidos 8 3,409 07-14-2020, 05:11 PM
Last Post: ProDigit
  rockpro 64 does not boot up automatically after software reboot rahulsharma 12 2,328 04-17-2020, 09:00 AM
Last Post: pgwipeout
  PCIe failure odhinnhrafn 11 2,042 03-16-2020, 08:39 AM
Last Post: odhinnhrafn
Question Can we add PCIE hub 1 to many pcie card seaurchin 1 579 11-25-2019, 11:08 AM
Last Post: tllim
  Tested PCIe cards and output kram0000 5 1,004 10-24-2019, 01:17 PM
Last Post: xalius
  No boot with Supermicro AOC-SASLP-MV8 (serial output) kram0000 0 284 10-22-2019, 04:00 PM
Last Post: kram0000
  12V 3A power supply and NVMe - PCIe kaylios 3 675 08-25-2019, 03:31 AM
Last Post: kaylios
  Sometimes no power to SATA PCIe controller rble 4 853 06-16-2019, 11:03 PM
Last Post: rble
  PCIE SATA controller ASM1062 problems or software vecnar 36 5,763 06-15-2019, 02:35 AM
Last Post: Nikolay_Po

Forum Jump:


Users browsing this thread: 1 Guest(s)