RockPro64 SSD Expansion Board/SATA Shield
#1
I know these exist for RPi4 but is there a dual SSD expansion board for the RP64 with SATA shield to mount the board to?
  Reply
#2
(08-19-2020, 10:09 AM)as0zial Wrote: I know these exist for RPi4 but is there a dual SSD expansion board for the RP64 with SATA shield to mount the board to?

https://store.pine64.org/product/rockpro...face-card/
  Reply
#3
(08-20-2020, 12:43 AM)evilbunny Wrote:
(08-19-2020, 10:09 AM)as0zial Wrote: I know these exist for RPi4 but is there a dual SSD expansion board for the RP64 with SATA shield to mount the board to?

https://store.pine64.org/product/rockpro...face-card/

No. More like this: https://cdn.shopify.com/s/files/1/0068/8...1556280944
  Reply
#4
No, the dual SATA solution available involves a PCIE x4 board and a case designed to fit the SBC, board, fan, heatsink and disks.

https://store.pine64.org/product/rockpro...as-casing/

there are also people on this forum who have gotten PCIE SATA board supporting 5+ drives to work with the RockPro64. So there are some pretty interesting options around. I did take a look at SupTronics and saw they had some fun looking toys as well - I will likely eventually get something Rpi so run alongside my PINE64 stuff, so I will try to keep them in mind.

the link I saw about someone using a 5-port (not sure if chipset could support more but there is a 5-port that works): https://forum.pine64.org/showthread.php?...5#pid73855
------
it doesn't get happy
it doesn't get sad
it just runs programs
  Reply
#5
Technically, you could use the board as0zial showed a picture from as it connects through a USB connector, that would also work with the RockPro64.

However, a standard PCIe SATA card is cheaper as there are literally hundreds around on Amazon, Ebay & co. Most of them work thanks to the drivers in the Linux Kernel out of the box, especially the Marvell chipsets are pretty well supported. It just makes sense to look up the chipset that sits on the card and compare that with the card's specification, that solves most problems before even buying (I have seen some cards with 6-8 Ports claiming a chipset that can only handle 4 Ports and then using the SATA splitters, which is just a mess)
  Reply
#6
Here's the board I'm using for 4 SATA. Seems to be recognized by the hardware and Kernel.
IBM H1110 SAS-2 6Gbps HBA LSI 9211-4i

https://www.ebay.com/itm/IBM-H1110-SAS-2...2749.l2649
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Troubleshooting RockPro64 + Roshambo case SSD problems necoc.yaotl 1 141 11-30-2020, 11:10 PM
Last Post: necoc.yaotl
  Mainline U-Boot with SPI, NVMe and SATA boot support sigmaris 64 17,282 11-30-2020, 02:41 PM
Last Post: Waryle
  Rockpro64 RAM issues sausal 4 599 11-30-2020, 04:10 AM
Last Post: mstevens
  hardrock64/rockpro64 questions xmixahlx 3 815 11-26-2020, 03:13 AM
Last Post: Munchkin
  Rockpro64 CPU fan mikeD 30 14,430 11-25-2020, 09:28 AM
Last Post: eduapof
  No sound from rockpro64 audio jack. rahulsharma 2 904 11-18-2020, 04:46 AM
Last Post: Wizzard
  NAS kit with RockPro64 keuplat 0 131 11-10-2020, 11:57 AM
Last Post: keuplat
  Rockpro64 with PCI FC Card - Not booting (Sometimes) MSteam 1 228 10-25-2020, 07:42 PM
Last Post: MSteam
  Rockpro64 boot issues larsgn 14 3,784 10-21-2020, 07:54 AM
Last Post: quinterro
  fan continously runs on kernel 5.8 but I need to use 5. kernel for PCIe sata card GreyLinux 4 533 10-20-2020, 10:52 AM
Last Post: GreyLinux

Forum Jump:


Users browsing this thread: 1 Guest(s)