No USB connection - phone not seen!
09-21-2020, 06:14 AM
@jmorris I've been struggling with this issue and it's varying symptoms since July. In frustration I decided to optimistically reflash the eMMC with mobian-pinephone-20200905.img. The problem remains with either eMMC or SD. Previously my client pc was reporting Pinephone interface renaming (from usb0 to enp0...) and subsequent disconnection.
Starting the Mobian based phone without usb cable connected reveals that usb0 is 'unavailable'.
usb0: unavailable
"usb0"
ethernet (musb-hdrc), --:--:--:--:--:--, hw, mtu 1500
GENERAL.DEVICE: usb0
GENERAL.TYPE: ethernet
GENERAL.HWADDR: --:--:--:--:--:--
GENERAL.MTU: 1500
GENERAL.STATE: 20 (unavailable)
GENERAL.CONNECTION: --
GENERAL.CON-PATH: --
WIRED-PROPERTIES.CARRIER: off
I'm still trying to rename and raise this interface - any advice greatfully received as I particularly want to use the 'convergent properties' of the device.
Starting the Mobian based phone without usb cable connected reveals that usb0 is 'unavailable'.
usb0: unavailable
"usb0"
ethernet (musb-hdrc), --:--:--:--:--:--, hw, mtu 1500
GENERAL.DEVICE: usb0
GENERAL.TYPE: ethernet
GENERAL.HWADDR: --:--:--:--:--:--
GENERAL.MTU: 1500
GENERAL.STATE: 20 (unavailable)
GENERAL.CONNECTION: --
GENERAL.CON-PATH: --
WIRED-PROPERTIES.CARRIER: off
I'm still trying to rename and raise this interface - any advice greatfully received as I particularly want to use the 'convergent properties' of the device.
