Manjaro 20.06 Step-By-Step Installation Guide
(06-25-2020, 01:30 AM)nathanielwheeler Wrote:
(06-24-2020, 07:24 PM)evj Wrote:
(06-24-2020, 12:56 AM)nathanielwheeler Wrote:
(06-23-2020, 10:59 PM)evj Wrote: (quote omitted for brevity)

Thanks! I have not yet tried your directions, but everything else I tried either failed, or the result was sooooo slow in booting, I gave up. In my many attempts, I destroyed the micro holder; I will have to physically hold it in, else devise some mechanical means (shoestring?) to hold the microSD in place.

Try pressing a key like ESC in your perpetual boot,there is a bug in the arm manjaro eMMC installer where it isn't loaded until you escape from the boot splash screen.

Keep in mind, if you're using the 20.04 eMMC installer, there's another bug that crashes the installer when you attempt to select the drive to install to.
I succeeded in booting from the micro. Used dd unto the micro; could not get the right Etcher to work on PBP. Now I am ready to do the final step. Do not understand why I need to get a fresh image; the original is till there. How do I identify the destination?
'lsblk -p' gives:
mmcblk1      179:0    0 58.2G  0 disk
mmcblk1p1    179:1    0  64M  0 part /boot
mmcblk1p2    179:2    0 58.1G  0 part /
mmcblk1boot0 179:32  0    4M  1 disk
mmcblk1boot1 179:64  0    4M  1 disk
mmcblk1rpmb  179:96  0  16M  0 disk
Is mmcblk1p1 or mmcblk1p2 the correct destination?
Would appreciate an answer.

I should have probably been more clear to that, when making the initial microSD card image, you should be on a system that uses an intel or amd chip, because Balena Etcher does not work on aarch64 (arm).  Etcher will therefore not work on PBP.

It looks like your partition numbering is different than mine was.  
mmcblk1p1 and mmcblkp2 look like partitions on the mmcblk1 drive.  I’m not sure why you don’t have your microSD card listed on here.  I would suggest asking the real experts on the Manjaro ARM forums for clarification.
I was not on Manjaro; took card out, and booted from original. I am on Manjaro now, on miicro. Now I have audio. Tomorrow I shall try to finish following your instructions (in Manjaro). Thanks for all the help.

Messages In This Thread
RE: Manjaro 20.06 Step-By-Step Installation Guide - by evj - 06-25-2020, 08:42 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Fedora 37 installation gswatkins 16 5,831 03-16-2024, 03:09 PM
Last Post: michel_luc
  Manjaro Sway Theme Broken Eighty8 1 259 03-08-2024, 08:41 AM
Last Post: tophneal
Question Manjaro with Full Disk Encryption and GRUB dumetrulo 1 1,719 02-02-2024, 02:45 AM
Last Post: frankkinney
  Manjaro network problem late 2023 acruhl 1 304 01-19-2024, 11:32 PM
Last Post: Kevin Kofler
  Help installing Manjaro on eMMC of Pinebook Pro pine4546464 4 2,071 12-13-2023, 07:22 PM
Last Post: trillobite
  Need Help Recovering Manjaro /boot Contents on Pinebook Pro calinb 6 2,150 12-11-2023, 03:47 AM
Last Post: calinb
  Manjaro 20.04 not loading from SD (with Manjaro on eMMC) zaius 1 385 12-07-2023, 03:11 PM
Last Post: wdt
  Manjaro ARM: enabling external monitors & fixing Broadcom WiFi after updating trifleneurotic 2 858 11-14-2023, 10:57 AM
Last Post: trifleneurotic
  Manjaro [ARM Stable Update] 2021-07-23 issues Bocanila 1 1,991 08-21-2023, 09:10 PM
Last Post: vanessadonald
  [Manjaro] u-boot won't boot from eMMC with (unbootable) SD card present zackw 1 1,944 08-21-2023, 09:08 PM
Last Post: vanessadonald

Forum Jump:

Users browsing this thread: 1 Guest(s)