USB hub as to connect some extra device
#11
No such luck here, my PINE A64+ shuts down when using a powered USB hub or won't power up if the hub is attached and already powered.

My experience with a x86_64 motherboard and a powered hub was that +5V fed back from the hub caused the +5V LED to be permanently on so I had to cut the +5V (red wire) in the PC --> Hub cable otherwise it would not power up. If I powered up and then applied power to the hub all was OK until next reboot.

I am using powered hubs with my 2 ODROID-C2's as I did with a Raspberry Pi 1 model B and Pi 2 with no problems.
  Reply


Messages In This Thread
RE: USB hub as to connect some extra device - by sboyce - 07-01-2016, 09:53 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)