OpenBSD 6.7 on Pinebook Pro
#28
(07-04-2020, 12:49 AM)I\ll assume your using cu ? bail out and change baud rate 1500000 to 115200. my nanopc-t4 uses 1500000 to boot then over to 115200 baud, works for me Wrote:
(05-15-2020, 11:29 AM)nohandlebars Wrote: I boot this with the serial cable connected however it always stops at the following two lines:

Code:
rkclock0 at mainbus0
rkclock1 at mainbus0

It's been a while since this was reported, but I was encountering this, so I'll just post my solution for the sake of anyone else who might be struggling with this.

My Pinebook Pro is from January when it was still shipping with Debian, which was still on my eMMC. After installing Manjaro 20.06 to the eMMC and making sure everything was up to date, I no longer have this problem and my OpenBSD SD card boots into the installer. I guess there is some problem with the version of U-Boot installed with Debian on Pinebook Pros made before the switch to Manjaro. There's probably a quicker way to accomplish that fix, but I'm still getting acquainted with this architecture, so this was easier for me.
  Reply


Messages In This Thread
OpenBSD 6.7 on Pinebook Pro - by SKG - 05-14-2020, 08:30 AM
RE: OpenBSD 6.7 on Pinebook Pro - by User 15267 - 05-15-2020, 11:29 AM
RE: OpenBSD 6.7 on Pinebook Pro - by SKG - 05-15-2020, 11:41 AM
RE: OpenBSD 6.7 on Pinebook Pro - by Lumat - 05-15-2020, 11:55 AM
RE: OpenBSD 6.7 on Pinebook Pro - by User 15267 - 05-16-2020, 06:05 AM
RE: OpenBSD 6.7 on Pinebook Pro - by SKG - 05-16-2020, 07:38 AM
RE: OpenBSD 6.7 on Pinebook Pro - by User 15267 - 05-16-2020, 09:17 AM
RE: OpenBSD 6.7 on Pinebook Pro - by Lumat - 05-16-2020, 11:58 AM
RE: OpenBSD 6.7 on Pinebook Pro - by SKG - 05-18-2020, 12:25 PM
RE: OpenBSD 6.7 on Pinebook Pro - by Lumat - 05-23-2020, 07:26 AM
RE: OpenBSD 6.7 on Pinebook Pro - by SKG - 05-23-2020, 07:35 AM
RE: OpenBSD 6.7 on Pinebook Pro - by Lumat - 05-23-2020, 01:16 PM
RE: OpenBSD 6.7 on Pinebook Pro - by SKG - 05-23-2020, 08:34 PM
RE: OpenBSD 6.7 on Pinebook Pro - by Lumat - 05-24-2020, 05:54 AM
RE: OpenBSD 6.7 on Pinebook Pro - by signaryk - 05-24-2020, 01:45 PM
RE: OpenBSD 6.7 on Pinebook Pro - by Lumat - 05-25-2020, 04:21 AM
RE: OpenBSD 6.7 on Pinebook Pro - by SKG - 05-25-2020, 04:46 AM
RE: OpenBSD 6.7 on Pinebook Pro - by tdc - 07-04-2020, 12:49 AM
RE: OpenBSD 6.7 on Pinebook Pro - by bigtreeman - 05-07-2021, 04:03 PM
RE: OpenBSD 6.7 on Pinebook Pro - by xmixahlx - 05-18-2020, 01:23 PM
RE: OpenBSD 6.7 on Pinebook Pro - by SKG - 05-18-2020, 08:22 PM
OpenBSD 6.7 on Pinebook Pro - by e-minguez - 05-19-2020, 08:38 AM
RE: OpenBSD 6.7 on Pinebook Pro - by SKG - 05-19-2020, 08:28 PM
RE: OpenBSD 6.7 on Pinebook Pro - by BronzeBeard - 05-23-2020, 12:13 PM
OpenBSD 6.7 on Pinebook Pro - by e-minguez - 06-05-2020, 10:21 PM
RE: OpenBSD 6.7 on Pinebook Pro - by SKG - 06-05-2020, 10:33 PM
RE: OpenBSD 6.7 on Pinebook Pro - by Tiny Pudding - 06-09-2020, 11:24 AM
RE: OpenBSD 6.7 on Pinebook Pro - by wdt - 06-06-2020, 02:44 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  How to install OpenBSD on the PBP? BenniTec 2 3,643 10-29-2022, 02:41 PM
Last Post: evantaylor
  NetBSD on the Pinebook Pro in August 2022 - or not? KC9UDX 6 3,498 08-24-2022, 01:49 AM
Last Post: KC9UDX
  OpenBSD 6.9 install StickyPine 18 19,609 02-02-2022, 04:34 PM
Last Post: mfashby
  NetBSD and pinebook keyboard/trackpad firmware updater mrgtwentythree 5 9,712 05-16-2021, 07:37 PM
Last Post: mrgtwentythree
  OpenBSD on the pinebook pro e-minguez 5 10,953 04-27-2021, 04:06 AM
Last Post: dreamer_
  PINEBOOK Pro USB-C Docking Deck on FreeBSD S199pWa1k9r 2 4,404 03-04-2021, 01:53 PM
Last Post: Arwen
Question Issues Installing NetBSD on a PineBook Pro ReleaseTheGeese 14 14,614 01-31-2021, 11:20 AM
Last Post: KC9UDX
Thumbs Up My NetBSD on Pinebook Pro journey KC9UDX 11 18,362 12-06-2020, 08:26 PM
Last Post: KC9UDX

Forum Jump:


Users browsing this thread: 2 Guest(s)