04-13-2020, 02:34 PM
Yeah that one should work.
The basic usage is: setting the headphone killswitch in the pinephone to the UART position. connect it to your computer and open any serial terminal application (like screen /dev/ttyUSB0 115200).
If you now boot the phone you should get u-boot debug messages and it should log the error.
The basic usage is: setting the headphone killswitch in the pinephone to the UART position. connect it to your computer and open any serial terminal application (like screen /dev/ttyUSB0 115200).
If you now boot the phone you should get u-boot debug messages and it should log the error.