05-05-2016, 11:10 AM
Hi,
I made a enclosure for the board
![[Image: oTd9Uy3PGVK5.png]](https://framapic.org/mJha6ekEUYyW/oTd9Uy3PGVK5.png)
I made some adjustment to stabilize the structure.
So there is the plan (svg and dxf files) : https://github.com/Macrois/Pine64Enclosure
License: CC-by-sa 4.0
Tools:
Laser cutting machine (80w, cut with 80% power and 1000mm/min speed)
MDF 3 millimeter thickness (i guess no problem with acrylic)
I made a enclosure for the board
I made some adjustment to stabilize the structure.
So there is the plan (svg and dxf files) : https://github.com/Macrois/Pine64Enclosure
License: CC-by-sa 4.0
Tools:
Laser cutting machine (80w, cut with 80% power and 1000mm/min speed)
MDF 3 millimeter thickness (i guess no problem with acrylic)
