02-17-2020, 02:15 PM
(02-17-2020, 01:59 PM)limxr Wrote:(02-17-2020, 10:43 AM)JaceAlvejetti Wrote: Followed the directions, in the end I reboot to a screen that does ask for my password but when I type its entered into the line below it in plain text, hitting enter doesn't do anything but move to the next line.
after some time modules will start to time out not being able to find firmware so I don't think my text is being entered in the right space.
Any thoughts?
It sounds like the boot process did not wait for the password prompt but just continued. Do you have rootwait set as a bootarg? I've attached my boot.txt to see as example.
I do at that and agree that is what it sounds like, heres mine:
setenv macaddr da 19 c8 7a 6d f4
part uuid ${devtype} ${devnum}:${bootpart} uuid
setenv bootargs console=tty1 root=/dev/mapper/cryptroot cryptdevice=UUID=bc3791fa-01e0-471d-9ace-a7cae5035c15:cryptroot:allow-discards rw rootwait quiet append video=eDP-1:1920x1080@60
setenv fdtfile rockchip/rk3399-pinebook-pro.dtb
if load ${devtype} ${devnum}:${bootpart} ${kernel_addr_r} Image; then
if load ${devtype} ${devnum}:${bootpart} ${fdt_addr_r} dtbs/${fdtfile}; then
fdt addr ${fdt_addr_r}
fdt resize
fdt set /ethernet@fe300000 local-mac-address "[${macaddr}]"
if load ${devtype} ${devnum}:${bootpart} ${ramdisk_addr_r} initramfs-linux.img; then
# This upstream Uboot doesn't support compresses cpio initrd, use kernel option to
# load initramfs
setenv bootargs ${bootargs} initrd=${ramdisk_addr_r},20M ramdisk_size=10M
fi;
booti ${kernel_addr_r} ${ramdisk_addr_r}:${filesize} ${fdt_addr_r};
fi;
fi