Rockpro64 and stock arch linux

[dragop]

@TaborFife, have you managed to get this working using an eMMC module instead of a SD card? I tried it, but it doesn't boot:

Code:

U-Boot TPL 2020.01-rc5-00042-g6cb87cbb14 (Jan 02 2020 - 15:30:57)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
Channel 1: LP
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to

U-Boot SPL 2020.01-rc5-00042-g6cb87cbb14 (Jan 02 2020 - 15:30:57 +0100)
Trying to boot from MMC2
unable to select a mode
mmc_load_image_raw_sector: mmc block read error
Trying to boot from MMmmc_load_image_raw_sector: mmc block read error
Trying to boot mmc_load_image_raw_sector: mmc block read error
SPL: failed to rd ###

FATAL: read from port failed: Device not configured

Hi, I'm able to boot from eMMC using the latest ROOTFS tarball. The latest kernel update seems to have nuked my setup though.

Good to know that it worked for you. Can you confirm the U-Boot version you are using? Is it also the 2020.01-rc5 version?

I cloned the master at the time. Since it booted right away, I didn't really try a proper release.