RPi.GPIO python module for Pine A64/A64+
#14
hi, I'm very active on the Raspberry PI forum, and plan to be active here as well...

... anyway, GPIO.BOARD simply means 'board' numbering from 1 to 40; as they are numbered on the Pine64 board itself... if the 'top' of the board is the ethernet port, with the RPi port on the right, the BOARD pins are numbered from left to right... top to bottom. So, pin(1) is top left, pin(40) is bottom right.

marcus

edit: PS... I got the RPi.GPIO built tonight on my ubuntu version and have tested my LED lab (hardware and software) from my RPi development; no hits, no runs, no errors ! Everything worked fine straight-away without modification one. Nice job !
  Reply


Messages In This Thread
RE: RPi.GPIO python module for Pine A64/A64+ - by MarkHaysHarris777 - 06-15-2016, 10:15 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  fm transmitter with gpio weasel18 2 4,752 09-10-2019, 04:28 AM
Last Post: desai_amogh
  How to use dts or other setup to declare gpio pin Interrupt (e.g. a button)? dkebler 1 3,547 06-12-2019, 10:37 AM
Last Post: dkebler
Lightbulb Sample GPIO codes highlighting RPi.GPIO-PineA64 and the PI bus MarkHaysHarris777 6 10,961 06-07-2019, 12:37 AM
Last Post: tllim
Star GPIO, SPI and I2C C++ Lib databit 7 11,045 02-04-2019, 05:45 AM
Last Post: Jeff R
Information Howto: Controlling Pine64 GPIO via the filesystem (sysfs) on linux pfeerick 4 11,756 01-24-2019, 03:36 AM
Last Post: Fifth
  GPIO and SPI SamR1 20 31,170 03-15-2018, 10:32 AM
Last Post: jomoengineer
Question GPIO shockr 7 14,590 03-11-2018, 01:52 AM
Last Post: jomoengineer
  Read GPIO problem shworker 14 20,944 08-17-2017, 01:21 PM
Last Post: martinayotte
  Cross-wired Uart Ports between two Pine Boards via Cat5 Cable MarkHaysHarris777 10 15,737 11-20-2016, 04:17 AM
Last Post: pfeerick
  GPIO fiq capability joseph 3 6,012 11-10-2016, 06:07 PM
Last Post: joseph

Forum Jump:


Users browsing this thread: 1 Guest(s)