Tutorial[ Seagate Disks ]: Optimize Life Span/Power Managment
#3
Hello tuxd3v, I managed to install OpenSeaChest Utilities!
With USB 3.0 external enclosure 3.5 and Ubuntu.
I hope it works now.
Code:
root@ubuntu:~# lsblk
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sdd      8:48   0   7.3T  0 disk
└─sdd1   8:49   0   7.3T  0 part /media/ubuntu/Daten3
sdb      8:16   0 465.8G  0 disk
├─sdb4   8:20   0 254.2G  0 part /media/ubuntu/9852F7D552F7B65A
├─sdb2   8:18   0   100M  0 part
├─sdb5   8:21   0   211G  0 part /media/ubuntu/Daten
├─sdb3   8:19   0    16M  0 part
└─sdb1   8:17   0   499M  0 part
sr0     11:0    1  1024M  0 rom  
loop0    7:0    0   1.4G  1 loop /rofs
sdc      8:32   1  28.7G  0 disk
└─sdc4   8:36   1  28.7G  0 part /cdrom
sda      8:0    0 489.1G  0 disk
└─sda1   8:1    0   489G  0 part /media/ubuntu/Datenspeicher

Code:
root@ubuntu:~/openSeaChest/Make/gcc/openseachest_exes# ./openSeaChest_Basics --deviceInfo --device /dev/sdd1
==========================================================================================
openSeaChest_Basics - openSeaChest drive utilities - NVMe Enabled
Copyright (c) 2014-2018 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
openSeaChest_Basics Version: 2.8.0-1_19_0 X86_64
Build Date: Jun 13 2019
Today: Thu Jun 13 09:02:29 2019
==========================================================================================

/dev/sg4 - 3.0 -            BCDEF - ATA
Vendor ID: USB    
Model Number: 3.0            
Serial Number: 0123456789ABCDEF
Firmware Revision: 0508
World Wide Name: 5000C500B4ADB587
Drive Capacity (TB/TiB): 8.00/7.28
Temperature Data:
Current Temperature (C): 32
Highest Temperature (C): 50
Lowest Temperature (C): 23
Power On Time:  2 hours
Power On Hours: 2.00
MaxLBA: 15628053167
Native MaxLBA: Not Reported
Logical Sector Size (B): 512
Physical Sector Size (B): 4096
Sector Alignment: 0
Rotation Rate (RPM): 7200
Form Factor (inch): 3.5
Last DST information:
DST has never been run
Long Drive Self Test Time:  13 hours 24 minutes
Interface speed:
Max Speed (Gb/s): 6.0
Negotiated Speed (Gb/s): 6.0
Annualized Workload Rate (TB/yr): 283.06
Total Bytes Read (MB): 593.95
Total Bytes Written (GB): 64.03
Encryption Support: Not Supported
Cache Size (MiB): 256.00
Read Look-Ahead: Enabled
Write Cache: Enabled
Low Current Spinup: Disabled
SMART Status: Unknown or Not Supported
ATA Security Information: Supported
Firmware Download Support: Full, Segmented, Deferred
Specifications Supported:
ACS-3
ACS-2
ATA8-ACS
ATA/ATAPI-7
ATA/ATAPI-6
ATA/ATAPI-5
ATA/ATAPI-4
SATA 3.1
SATA 3.0
SATA 2.6
SATA 2.5
SATA II: Extensions
SATA 1.0a
ATA8-AST
SPC-4
UAS
SPC-4
SBC-3
Features Supported:
Sanitize
SATA NCQ
SATA Rebuild Assist
SATA Software Settings Preservation [Enabled]
SATA Device Initiated Power Management
Power Management
Security
SMART [Enabled]
48bit Address
PUIS
GPL
Streaming
SMART Self-Test
SMART Error Logging
Write-Read-Verify
AMAC
EPC [Enabled]
Sense Data Reporting
SCT Write Same
SCT Error Recovery Control
SCT Feature Control
SCT Data Tables
Host Logging
Seagate In Drive Diagnostics (IDD)
Seagate Remanufacture

Can you please advise me, which settings are most appropriate for my needs?
I mainly use for multimedia entertainment (stream DLNA, movie, music).
1. I want that the hard drive consumes so little power, because most of the time it will be in standby, and only when streaming needs power.
2. Which Spindown time is appropriate for my needs? (Do I need this?)
3. Which power management makes sense for my needs? (127, 128, 192?)
4. Which settings are important to activate?
Many Thanks!


Messages In This Thread

Possibly Related Threads…
Thread Author Replies Views Last Post
  SkiffOS server with Docker ,NAS, Home assistant, Jellyfin, Snikket XMPP (tutorial) GreyLinux 12 10,791 04-04-2022, 05:26 AM
Last Post: GreyLinux
  SimpNas server with docker - home assistant, radicale , jellyfin & esphome (tutorial) GreyLinux 0 4,548 01-17-2021, 11:33 AM
Last Post: GreyLinux
  Tutorial:How to Configure ATS Fan control tuxd3v 26 55,224 11-06-2020, 08:56 PM
Last Post: g_t_j
  Serial Connection Tutorial: FTDI 232RL hmuller 0 3,457 10-23-2020, 11:56 AM
Last Post: hmuller
Thumbs Up Tutorial[ Seagate Disks ]: Install Seagate OpenSeaChest Utilities tuxd3v 41 79,647 04-08-2019, 10:10 AM
Last Post: Neo2018
  Tutorial[ Multimedia ] : Play DVD movies tuxd3v 0 2,847 02-26-2019, 07:21 PM
Last Post: tuxd3v
  Tutorial[ OpenCL ]: OpenCL 1.2 FULL_PROFILE Working tuxd3v 0 4,091 11-06-2018, 01:03 PM
Last Post: tuxd3v

Forum Jump:


Users browsing this thread: 1 Guest(s)