03-18-2019, 05:50 AM
(03-16-2019, 12:30 PM)Neo2018 Wrote:(03-07-2019, 06:09 PM)tuxd3v Wrote: Well seems that the usb option its the only way..Hello tuxd3v
With USB have not tested it yet (little time)
But I discovered another problem. Much more important.
I'm having trouble setting in OMV > physical disk properties > Spindown time.
The hard drive goes too fast in standby mode.
I have created a new post in OMV Forum and PINE64 Forum.
Maybe you can look at it, or have a solution! It would be great.
Thank you.
Hello Neo2018,
The APM mode 127, sends the disk in standby, relatively fast..
I don't know if you remember that I asked you about if you had something else Running from the IronWolf disk?
Usually, the best Thing is maintaining it only for Data, without Os and so..
Because if not, the disk will be waked constantly, reducing its life time (load/unload heads counts..)..
This has nothing to do with the PCIe card, or with the timers on the disk..
The timers by default are very nice, Seagate disks behave usually nicer in that regard..
If a disk is sleeping, and you issue some monitoring command on Him, it will wakeup, and I think this his the behaviour you are experiencing..
Maybe OMV is doing monitoring too much..
Try to use its corresponding SCSI counterpart, /dev/sgx, this can work for some commands, and doesn't usually wakeup the disks, but its more limited than query the /dev/sdX..
Maybe this is the problem..
