11-13-2018, 05:33 AM
(This post was last modified: 11-13-2018, 09:50 AM by onderbetaald.)
Hi,
Thanks for your reply. I want to connect a DJI controller, but you probably don't have one at your disposal. I guess performing a data transfer would prove that the ROCK64 is working in slave mode. So it would be great if you could test this for me! Be aware that you will have to connect the top USB 2.0 port of the ROCK64 to your computer, as this is the USB OTG port. And while you're at it, maybe you can try to connect it to a different port is well (for instance the bottom USB 2.0 port) and see if you're still able to make the data transfer. If you are able to make the transfer in the first test but not the second, I'm confident that all drivers are there and everything is alright.
Your help is much appreciated,
Onderbetaald
Thanks for your reply. I want to connect a DJI controller, but you probably don't have one at your disposal. I guess performing a data transfer would prove that the ROCK64 is working in slave mode. So it would be great if you could test this for me! Be aware that you will have to connect the top USB 2.0 port of the ROCK64 to your computer, as this is the USB OTG port. And while you're at it, maybe you can try to connect it to a different port is well (for instance the bottom USB 2.0 port) and see if you're still able to make the data transfer. If you are able to make the transfer in the first test but not the second, I'm confident that all drivers are there and everything is alright.
Your help is much appreciated,
Onderbetaald
