cpu and case fan headers on PRO (NAS box)
(10-04-2018, 03:56 PM)dkebler Wrote: I am assembling a recently arrived "new" NAS box.  There are of course two fans (cpu, case).  There is only one header labeled FAN (near gpio bus).   I assume that if for the cpu fan and can be controlled by os/kernel?   Where then should the case fan connect?  There is another compatible two pin header labeled RIC nearby the fan header.

Also Is there any proper "motherboard" manual like one would get with a standard motherboard.    The wiki has no detailed information on the board and it's connectors/headers.

check this: https://forum.pine64.org/showthread.php?tid=6598

Messages In This Thread
RE: cpu and case fan headers on PRO (NAS box) - by tllim - 10-04-2018, 04:00 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Troubleshooting RockPro64 + Roshambo case SSD problems necoc.yaotl 1 1,179 11-30-2020, 11:10 PM
Last Post: necoc.yaotl
  Rockpro64 Case WIP xbcsmith 1 1,696 09-26-2020, 12:46 AM
Last Post: zer0sig
  Rockpro64 Case WIP xbcsmith 0 956 01-26-2020, 05:02 PM
Last Post: xbcsmith
  RockPro64 & Roshambo Case Gouki 2 2,110 01-26-2020, 12:57 AM
Last Post: EagleFlyFree
  NAS Case and two hard drives? jsfrederick 7 4,150 12-21-2019, 09:14 AM
Last Post: hemertje
Question How to automatically reboot rockpro64 in case it shutdown abruptly ? seaurchin 2 1,934 11-25-2019, 08:46 AM
Last Post: tophneal
Photo RockPro64 Case 2x3.5" HDDs and 2x2.5 HDDs Luke 48 59,870 10-17-2019, 11:58 AM
Last Post: Tim Jones
  Basic question on the Nas case of the rockPro Slam 1 1,523 01-23-2019, 08:04 AM
Last Post: Slam

Forum Jump:

Users browsing this thread: 1 Guest(s)