Hardware issue overheating while booting and fail to boot
#13
(08-23-2018, 01:43 PM)DIDquest Wrote: 2. I used the top USB 2.0 port, but I will try it again with the type c connector just in-case

Just trying to digest bits of the schematic and it seems to me the 2 OTG ports are connected to the  2 USB3 bits - the USB C and the standard USB-A above it. I do not have a USB-A/USB-A cable so cannot test - if you can check and feedback but methinks the wiki will need a correction.

Fab thermal images Cool
  • ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Arch (6.2 kernel, Openbox desktop) for general purpose daily PC.
  • PinePhone Pro Explorer Edition, daily driver, rk2aw & U-boot on SPI, Arch/SXMO & Arch/phosh on eMMC
  • PinePhone BraveHeart now v1.2b 3/32Gb, Tow-boot with Arch/SXMO on eMMC


Messages In This Thread
RE: Hardware issue overheating while booting and fail to boot - by dukla2000 - 08-27-2018, 03:47 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  enble boot after power loss/restore dkebler 18 8,954 12-04-2023, 12:14 PM
Last Post: ok38
  Mainline U-Boot with SPI, NVMe and SATA boot support sigmaris 108 116,647 09-25-2023, 12:46 AM
Last Post: ChriChri
Bug Broken boot: What am I missing? mkosarek 1 610 09-08-2023, 08:14 AM
Last Post: wdt
  Unable to boot Armbian on new RockPro64 mooseball 5 4,097 07-14-2023, 08:59 AM
Last Post: rockjonn
  no boot white led flashing moserwi 7 4,113 05-18-2023, 10:46 AM
Last Post: wdt
  Hardware fix for software sound problem on Rockpro64 Ricks Rockpro 0 837 04-06-2023, 03:59 PM
Last Post: Ricks Rockpro
  u-boot locked on pine64pro ljones 1 1,481 09-06-2022, 10:32 AM
Last Post: ljones
  Cannot get my board to boot deutschlmao 11 7,849 09-05-2022, 04:23 PM
Last Post: ljones
  U-BOOT Tutorial hazz 0 1,109 07-19-2022, 10:48 PM
Last Post: hazz
  Installation Debian on emmc: which U-Boot and where? vongillus 3 2,680 07-02-2022, 09:24 AM
Last Post: dkebler

Forum Jump:


Users browsing this thread: 1 Guest(s)