PCIe SSD drive still not working ??
#1
Sorry if I'm being totally stupid and posted in wrong area, but...

I've just received a new production unit (Rockpro64 V2.1 2018-06-06) together with a PCIe 3.0 x4 to M.2 (NGFF) SSD Adaptor, to which I've added a WD blue SSD M.2 2280 drive.

I'm using Ayufan's latest builds, both minimal & full, but nothing I try allows access to the drive. 

The boot logging shows an error connecting to the PCIe device(s), but I'm not sure what is going on (sorry but I'm unable to upload file).

The drive I've tested in a normal PC & can create\format partitions etc... 

Reading other posts on the site, relate to a resistor that needs to be removed ?  but I was under the impression that the board I purchased was one of the new 'fixed' ones, so should work ok ??

Any thoughts or suggestions gratefully received....


Messages In This Thread
PCIe SSD drive still not working ?? - by dr_ju_ju - 08-07-2018, 01:17 PM
RE: PCIe SSD drive still not working ?? - by wis - 08-07-2018, 04:24 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Installing Wifi drive for the RockPro64 John45595 0 174 02-10-2024, 11:32 PM
Last Post: John45595
  Cant get rockpro64 working brasilikum 3 1,702 03-19-2023, 06:22 AM
Last Post: runyor
  RockPro64 Stopped working WarpLover 5 2,518 02-06-2023, 10:10 AM
Last Post: diizzy
  PCIE interface power on too late Slark Xiao 0 958 11-29-2022, 11:56 PM
Last Post: Slark Xiao
  After Power Loss feature working bdherouville 2 2,120 08-22-2022, 03:52 AM
Last Post: bdherouville
  Booting my RockPro64 from NVMe drive PsySc0rpi0n 4 5,615 05-11-2022, 02:35 PM
Last Post: PsySc0rpi0n
  PCIe gen1 timeout - how to debug tosi 3 4,450 03-10-2022, 05:06 PM
Last Post: db579
  Anyone try an NVIDIA GPU in the PCIe slot? Paraplegic Racehorse 0 1,702 04-15-2021, 11:46 AM
Last Post: Paraplegic Racehorse
  Never ever mix up CPU board connector with 8-pin PCIE connector LMM 0 1,731 02-11-2021, 10:18 AM
Last Post: LMM
  PCIe Armbian and Ayufan for nvme ssd LMM 1 2,625 02-03-2021, 04:38 PM
Last Post: LMM

Forum Jump:


Users browsing this thread: 1 Guest(s)