LCD not functioning with A64-LTS/SOPINE
#15
(05-03-2018, 08:47 AM)Serper Wrote: Bonjour,
Suite à une recherche, j’ai pu comparer 2 fichier .fex  .
https://github.com/ayufan-pine64/boot-to...nebook.fex
Code:
disp init configuration
;
;disp_mode             (0:screen0<screen0,fb0>)
;screenx_output_type   (0:none; 1:lcd; 3:hdmi;)
;screenx_output_mode   (used for hdmi output, 0:480i 1:576i 2:480p 3:576p 4:720p50)
;                      (5:720p60 6:1080i50 7:1080i60 8:1080p24 9:1080p50 10:1080p60)
;fbx format           (0:ARGB 1:ABGR 2:RGBA 3:BGRA 5:RGB565 8:RGB888 12:ARGB4444 16:ARGB1555 18:RGBA5551)
;fbx_width,fbx_height (framebuffer horizontal/vertical pixels, fix to output resolution while equal 0)
;----------------------------------------------------------------------------------
[disp]
disp_init_enable         = 1
disp_mode                = 0

screen0_output_type      = 1
screen0_output_mode      = 4

screen1_output_type      = 3
screen1_output_mode      = 4

et à la ligne 527, LCD est activé et utilise le pilote "anx9804_panel"
____________________________________________________________________________________________________________________________
https://github.com/ayufan-pine64/boot-to...sopine.fex
Code:
;disp init configuration
;
;disp_mode             (0:screen0<screen0,fb0>)
;screenx_output_type   (0:none; 1:lcd; 3:hdmi;)
;screenx_output_mode   (used for hdmi output, 0:480i 1:576i 2:480p 3:576p 4:720p50)
;                      (5:720p60 6:1080i50 7:1080i60 8:1080p24 9:1080p50 10:1080p60)
;fbx format           (0:ARGB 1:ABGR 2:RGBA 3:BGRA 5:RGB565 8:RGB888 12:ARGB4444 16:ARGB1555 18:RGBA5551)
;fbx_width,fbx_height (framebuffer horizontal/vertical pixels, fix to output resolution while equal 0)
;----------------------------------------------------------------------------------
[disp]
disp_init_enable         = 1
disp_mode                = 0

screen0_output_type      = 3
screen0_output_mode      = 5

screen1_output_type      = 1
screen1_output_mode      = 5

et à la ligne 546, LCD est desactivé et utilise le pilote "mb709_mipi"
_______________________________________________________________________________________________________________________
Le Uenv.txt ne servira à rien tant que le fichier sys_config_pine64-sopine.fex ne sera pas modifié.
Au passage j'ai pu trouver le pilote du tactile "gt911f" dans etc/module.
En bref... il y a tout se qui faut pour le faire fonctionner.

EDIT: a priori ce fichier en .FEX active LCD avec les bon paramètres mais reste a voir si il est compatible avec le pine64-LTS.


Messages In This Thread

Possibly Related Threads…
Thread Author Replies Views Last Post
  EMMC with Android on Sopine koekoeboy 1 4,987 05-29-2020, 11:42 PM
Last Post: tllim
  Android 7.1 (SOPINE) pineadmin 5 11,560 12-01-2019, 01:53 PM
Last Post: tllim
  Android 6.0.1 (PINE A64-LTS / SOPINE) pineadmin 4 7,810 12-30-2018, 08:36 PM
Last Post: wombat
  When will Remix OS be available for sopine? Will. 0 3,179 04-26-2017, 02:25 AM
Last Post: Will.

Forum Jump:


Users browsing this thread: 2 Guest(s)