Query regarding MIPI CSI camera support
#3
(02-28-2018, 11:03 AM)xalius Wrote: Current prototype RockPro64 have dual MIPI-CSI and one parallel CSI port, and I don't think there are any changes planned regarding production boards. The connectors are not directly compatible to the RPi FFC cable since the MIPI-CSI on the RK3399 supports 4 lanes instead of the 2 on the RPi interface, so it is a 30 pin wide FFC connector, I can see if I can post the pinout that is currently used...

Thanks for replying. Given that RockPro64 and later iteration RockPro64AI are positioned towards AI and computer vision enthusiast, it would be great, if you could include supported reasonably priced "stereo camera" /"single camera" in your accessory store. You can share the pin layout here, but it would be wonderful if you can find and share links of some supported camera available online (maybe on aliexpress)


Messages In This Thread
RE: Query regarding MIPI CSI camera support - by kafan1986 - 02-28-2018, 12:10 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Mainline U-Boot with SPI, NVMe and SATA boot support sigmaris 108 118,926 09-25-2023, 12:46 AM
Last Post: ChriChri
  Support says "regulator" on the SBC burned out; how to fix? dmos 0 901 06-02-2022, 02:20 AM
Last Post: dmos
  Camera sensor support on MIPI lines abhimanyu_gr 0 1,708 01-22-2021, 09:23 AM
Last Post: abhimanyu_gr
  RockPro 64 MIPI Pinout carbotaniuman 3 5,221 05-21-2020, 03:41 AM
Last Post: dukla2000
  USB Type-C Display cable support (for 2 in 1: Video + Power) Paprika88 0 2,391 02-12-2020, 06:47 AM
Last Post: Paprika88
  rockpro64 support in the rockchip uboot dedoz 0 2,166 01-13-2020, 01:51 PM
Last Post: dedoz
  Vulkan support with rockpro64 rahulsharma 2 5,003 08-21-2019, 10:34 PM
Last Post: rahulsharma
  SPI support in GPIO mr_rabbit 2 4,241 07-21-2019, 11:42 PM
Last Post: Wom the Bat
  Calculate clock frequency for MIPI DPHY using different ref_clock value skumar 1 3,043 06-07-2019, 03:01 PM
Last Post: Nikolay_Po
  Non burst mode in MIPI DSI skumar 0 1,968 06-06-2019, 12:54 AM
Last Post: skumar

Forum Jump:


Users browsing this thread: 2 Guest(s)