Hi! I'd like to know if it's possible to use a GSPCA webcam (Genius Eye 312) and what should I do to make this work...
I connected it and it's recognized but I don't have the needed kernel modules
11: USB 00.0: 11200 TV Card
[Created at usb.122]
Unique ID: PYMB.aEpd4CIdXq6
Parent ID: zPk0.0z742tmRuH6
SysFS ID: /devices/platform/usb@ff600000/ff600000.dwc3/xhci-hcd.8.auto/usb4/4-1/4-1:1.0
SysFS BusID: 4-1:1.0
Hardware Class: tv card
Model: "Pixart Imaging Webcam Genius"
Hotplug: USB
Vendor: usb 0x093a "Pixart Imaging, Inc."
Device: usb 0x2622 "Webcam Genius"
Revision: "1.00"
Speed: 12 Mbps
Module Alias: "usb:v093Ap2622d0100dc00dsc00dp00icFFiscFFipFFin00"
Driver Info #0:
Driver Status: gspca_pac7311 is not active
Driver Activation Cmd: "modprobe gspca_pac7311"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #10 (Hub)
Any help woult be appreciated!
I connected it and it's recognized but I don't have the needed kernel modules
11: USB 00.0: 11200 TV Card
[Created at usb.122]
Unique ID: PYMB.aEpd4CIdXq6
Parent ID: zPk0.0z742tmRuH6
SysFS ID: /devices/platform/usb@ff600000/ff600000.dwc3/xhci-hcd.8.auto/usb4/4-1/4-1:1.0
SysFS BusID: 4-1:1.0
Hardware Class: tv card
Model: "Pixart Imaging Webcam Genius"
Hotplug: USB
Vendor: usb 0x093a "Pixart Imaging, Inc."
Device: usb 0x2622 "Webcam Genius"
Revision: "1.00"
Speed: 12 Mbps
Module Alias: "usb:v093Ap2622d0100dc00dsc00dp00icFFiscFFipFFin00"
Driver Info #0:
Driver Status: gspca_pac7311 is not active
Driver Activation Cmd: "modprobe gspca_pac7311"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #10 (Hub)
Any help woult be appreciated!