rkflashtool -n does not recognize memory [RESOLVED]
#7
Thumbs Up 
I was never successful in using rkflashtool to work, with either the eMMC or SD cards.  

I was able to flash the eMMC card by using a spare oDroid C2 that I had, writing to the card via it's SD interface and an SD->eMMC adapter, using some CLI commands described here.

For the image, I used the Xenial Mate 1G image from https://github.com/ayufan-rock64/linux-b...tag/0.5.15 . The more recent pre-leases failed to boot.

With the eMMC flashed with an released image, the board came up into the UI in under 3 seconds - very impressive.


Messages In This Thread
RE: rkflashtool -n does not recognize memory - by toby - 12-25-2017, 10:45 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  rock64, compile problems "illegal instruction", "memory fault" -> ddr_333Mhz? klausfelix 0 1,499 07-02-2021, 03:13 PM
Last Post: klausfelix
  rock64, compile problems "illegal instruction", "memory fault" -> ddr_333Mhz? hunderteins 10 14,925 11-17-2020, 08:00 AM
Last Post: Johannes
Photo ROCK64 v3 4GB DDR board memory chip number Johannes 2 4,254 04-05-2020, 04:29 AM
Last Post: Johannes
  Rock64 does not boot - SPI problem [resolved] csharpy 7 10,336 03-21-2018, 09:34 PM
Last Post: pfeerick
  Unable to flash Android TV on eMMC: rkflashtool error fbossi 3 5,053 02-02-2018, 08:37 AM
Last Post: dannyboyw
  ROCK64 does not recognize USB Wifi module (WL300NU-G) pine3228 2 4,065 01-03-2018, 03:56 AM
Last Post: pine3228

Forum Jump:


Users browsing this thread: 1 Guest(s)