05-30-2017, 12:58 AM
Problems like this are almost always PSU power related; but, also corruption of SD card cannot be ruled out.
Often if you can get it to boot up, it will run for a long time on a marginal power supply; boot up creates spikes that can cause issues if the PSU is marginal; I will not argue about it though.
We recommend 5.1v @2500ma 2.5A
Also, Samsung Evo Plus Class 10 cards, 32Gb.
There have been many enhancements lately; you might try a newer kernel since you're almost certainly going to have to reload the SD card anyway. Don't use a charger, get yourself a good switching power supply ; two wire 18-22 AWG and power the board via the euler bus.
There are several good articles in the DCIN section of the forum; with pics.
Often if you can get it to boot up, it will run for a long time on a marginal power supply; boot up creates spikes that can cause issues if the PSU is marginal; I will not argue about it though.
We recommend 5.1v @2500ma 2.5A
Also, Samsung Evo Plus Class 10 cards, 32Gb.
There have been many enhancements lately; you might try a newer kernel since you're almost certainly going to have to reload the SD card anyway. Don't use a charger, get yourself a good switching power supply ; two wire 18-22 AWG and power the board via the euler bus.
There are several good articles in the DCIN section of the forum; with pics.
marcushh777 
please join us for a chat @ irc.pine64.xyz:6667 or ssl irc.pine64.xyz:6697
( I regret that I am not able to respond to personal messages; let's meet on irc! )
please join us for a chat @ irc.pine64.xyz:6667 or ssl irc.pine64.xyz:6697
( I regret that I am not able to respond to personal messages; let's meet on irc! )
