PINE64 Acrylic Open Enclosure
#4
(03-16-2016, 06:40 PM)jl_678 Wrote: What are you doing for the spacers?

Sent from my SM-T537V using Tapatalk

 I'm going to use brass standoffs. l'll use some small ones (something like 8mm) below the board, and taller ones above. In the picture that started the thread, the hex bolts are only used to hold the acrylic slabs together and some kind of plastic piece is used to attach the RasPi to the slab. I decided to have the standoffs do both functions.

I ordered 4" x 6" pieces which will give me ~1/2" of edge on all sides of the Pine64. The mounting holes on the Pine64 are 5mm in from the corner (on the diagonal), so I'll drill 4 holes in my acrylic slabs at 1/2" + 5mm from the corners and attach the Pine64 and attach the acrylic pieces together in one shot.

Only thing I'm still working on is what to do about the "feet" on the underside. I'm looking for some kind of rubber stick-ons or something so I can have a unit that's less likely to slide around since it'll weigh almost nothing.

   
  Reply


Messages In This Thread
PINE64 Acrylic Open Enclosure - by jmc - 03-02-2016, 12:57 PM
RE: PINE64 Acrylic Open Enclosure - by Akazungu - 03-16-2016, 02:36 PM
RE: PINE64 Acrylic Open Enclosure - by jl_678 - 03-16-2016, 06:40 PM
RE: PINE64 Acrylic Open Enclosure - by Akazungu - 03-17-2016, 06:15 AM
RE: PINE64 Acrylic Open Enclosure - by jl_678 - 03-17-2016, 07:46 PM
RE: PINE64 Acrylic Open Enclosure - by Akazungu - 03-18-2016, 06:41 AM
RE: PINE64 Acrylic Open Enclosure - by killor - 03-23-2016, 08:39 AM
RE: PINE64 Acrylic Open Enclosure - by norm24 - 03-23-2016, 10:08 AM
RE: PINE64 Acrylic Open Enclosure - by andrew - 04-04-2016, 12:33 PM
RE: PINE64 Acrylic Open Enclosure - by Coterabeth - 04-10-2016, 06:15 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Are the Pine64 Acrylic Open Enclosures Stackable? abhinava 5 6,747 09-17-2020, 06:41 AM
Last Post: dabou
  Made a case for the Pine64 with Audio DAC installed kodachrome 1 2,715 11-12-2019, 04:52 AM
Last Post: xalius
Video 7" LCD wooden framen enclosure for Pine64 *UPDATED WITH killor 12 13,966 10-12-2018, 03:08 PM
Last Post: tllim
Lightbulb Perfect ABS Plastic Server Enclosure from Radio Shack MarkHaysHarris777 14 23,227 09-11-2017, 11:39 AM
Last Post: stuartiannaylor
  A case with active cooling for 1Gb pine64 ishwest 5 7,040 06-28-2017, 04:05 AM
Last Post: ishwest
Rainbow (Cluster) Modified Playbox Enclosure Progress predominant 3 3,591 06-17-2017, 01:29 AM
Last Post: pfeerick
  Nostalgic enclosure VHS carlo318 4 5,466 03-05-2017, 04:56 PM
Last Post: carlo318
  How is the battery Supposed to be mounted in the PlayBox enclosure? dbarbee 2 4,113 02-12-2017, 10:17 PM
Last Post: tllim
  Enclosure for flush-mounting the 7" touchscreen Learnincurve 9 9,071 02-07-2017, 08:45 PM
Last Post: Bluphire
  Official C4 Labs LCD Enclosure *UPDATED WITH ASSEMBLY VIDEO* Bluphire 12 18,859 01-06-2017, 03:15 AM
Last Post: Learnincurve

Forum Jump:


Users browsing this thread: 1 Guest(s)