Was playing around with the idea of making a SuperMario themed casing for my Pine.
The casing will be made in 3mm acrylic and the overall dimmensions of it will be 135x135x135mm.
I was not able to attach image, but if you follow the link under you can see the "prototype" of the case from my OneDrive album.
The album can be found here...
(The last image is side by side my Lumia 925 as reference to the size of the casing)
Because of the design there is ALOT of room for "shields" and addons to the Pine.
Needless to say this is going to be used as a gaming console...
UPDATE 27. April 2016:
New STL file is uploaded to my Google Drive account.
Newest update is raising the cutouts 5mm to make sure there is room for the soldering points underneath the Pine
The file can be found HERE!
The casing will be made in 3mm acrylic and the overall dimmensions of it will be 135x135x135mm.
I was not able to attach image, but if you follow the link under you can see the "prototype" of the case from my OneDrive album.
The album can be found here...
(The last image is side by side my Lumia 925 as reference to the size of the casing)
Because of the design there is ALOT of room for "shields" and addons to the Pine.
Needless to say this is going to be used as a gaming console...
UPDATE 27. April 2016:
New STL file is uploaded to my Google Drive account.
Newest update is raising the cutouts 5mm to make sure there is room for the soldering points underneath the Pine
The file can be found HERE!
![[Image: PicsArt_02-23-08.31.50.png?psid=1]](https://ns4zgw-bn1305.files.1drv.com/y3mkAQa_htCwYXSXktky0OLAiG89Pu5xnXzC95xcOatsobchbg2NXHsjfvncyeSLI-ki4ij1oUGqKmKli8BOXQiMTbLWYhN74IqTh2KbFRup-fPiRfqLpsaYgykOcLBU1Wr1qz9ko2yfZ_pm2Wp7x_fhZ7vf02d4qp6iUDa2sTiypk/PicsArt_02-23-08.31.50.png?psid=1)
