Australia/New Zealand Z-Wave module
#41
(03-20-2016, 08:26 PM)tllim Wrote:
(03-20-2016, 06:00 PM)zadok Wrote:
(03-18-2016, 05:45 PM)Crispin Wrote:
(03-18-2016, 05:17 PM)mist42nz Wrote: I would require the NZ/AU version of Z Wave.  don't mind paying a little extra for it.

A version that violates local transmission rules is completely NO use to me !!

I have received about 10 "backerkit survey" requests.  But none have the AU option listed.

Hi there - the item is certainly on my BackerKit, have you scrolled down far enough? This is the page - https://pine64.backerkit.com/backer/addons - and here is what it looks like...

[Image: ae0031f.png]

Could you please confirm how we are supposed to add this to our order without adding to our costs? I've backed the IoT package which means the z-wave board is included but my survey only has US and EU z-wave board options. I can see the AU option in the backerkit addon page however this suggests that I would need to pay an additional US$30 to get AU supported z-wave.
If your address is Australia and New Zealand, we will ship out AU version.
Hi tllim,

I sent several emails to your team via KS' private messages, KS' comment section, and shipping@PINE64.com during the past months (the first one was sent on 18-Feb), but no one got responded.   Those I sent via KS private messages are extracted below for your reference.
==========================
  • Feb 18 2016
    @Creator 
    As I live in Hong Kong, if I want to add a Z-wave module, should I choose the EU version or the US version? I did a little bit research on Internet. It seems like HK/AUS/NZ are using different MHz (919/921) than the EU(868) and the US (908), please advise.
    Also, I noticed from Backerkit that the Media Kit package will come with Acrylic/Stainless Steel Open Enclosure but the Enclosure for IOT Package was not specified. Please also confirm if the IOT package will come with the Acrylic/Stainless Steel Open Enclosure or other Enclosure type. Thanks!


  • Feb 23 2016
    @Creator
    I live in Hong Kong. If I go for a Z-wave module, which version should I choose (US/UK)? Also, which version will come with the IOT package?
    It seems like AUS/NZ/HK are using different MHz (919/921) than the EU(868) and the US(908).
    Also, I noticed from Backerkit that Media Kit will come with Acrylic/Stainless Steel Open Enclosure but no similar information for IOT Package. Please advise.
    Finally, I wanted to know the dimensions of Lipo battery so I can buy one here to fit it in the Playbox enclosure.
    Thanks!


  • Apr 2 2016
    Hi Creator,
    My last PMs sent you in Feb still don't get answered. Anyway, I have completed my survey and added an IOT package in my pledge.
    Just to remind that here in HK we need a Z-wave card with different Mhz than the EU and US types.
    It's very much appreciated if you can confirm the matter by replying the message.
    Thanks!

============================
My questions:

1) May I confirm if HK is using the same version of Z Wave as AU/NZ?

2) If yes, will you ship out AU version to our HK backers?  I have an IOT package in my pledge.

3) If you do not intend to ship appropriate version of Z wave module to HK, please help to remove the IOT kit add-on from my pledge and arrange to refund me.  My pledge then remains the following: (i) A64+ 2GB board, (ii) Wifi/BT module, (iii) Airmouse with keyboard, (iv) Acrylic Open Enclosure.  

Thanks!
  Reply


Messages In This Thread
Australia/New Zealand Z-Wave module - by Jnimmo - 02-02-2016, 02:17 PM
RE: Australia/New Zealand Z-Wave module - by bogg - 02-18-2016, 06:12 AM
RE: Australia/New Zealand Z-Wave module - by rene - 05-13-2016, 04:42 PM
Australia/New Zealand Z-Wave module - by grantos - 03-23-2016, 06:09 PM
Australia/New Zealand Z-Wave module - by grantos - 07-17-2016, 02:06 AM
RE: Australia/New Zealand Z-Wave module - by rene - 07-17-2016, 04:58 AM
RE: Australia/New Zealand Z-Wave module - by rene - 09-30-2016, 12:35 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
Question Z-Wave module pinout to make it compatible with Pi b+ ebretteville 59 82,970 07-12-2019, 08:55 AM
Last Post: kris240376
Sad Z-Wave and openzwave+node-openzwave-shared saro 2 6,228 09-01-2017, 05:22 AM
Last Post: saro
  Z-Wave - Full and Low Power Inclusion mode B34N 1 4,199 03-26-2017, 06:03 PM
Last Post: B34N
  KICAD Quick Lib and Module Generator mbt28 1 4,612 02-12-2017, 10:45 PM
Last Post: tllim
  Z Wave Module and still using GPIO bang 2 5,704 01-16-2017, 03:12 AM
Last Post: bang
  Z-Wave US module with adapter aegrotatio 4 7,137 01-08-2017, 12:03 AM
Last Post: aegrotatio
  RaZberry Module (z-wave) need support to get it working! Luxus 13 18,721 11-03-2016, 02:04 AM
Last Post: Luxus
  Z-Wave module problem vintagewaffle 0 2,320 10-26-2016, 10:50 AM
Last Post: vintagewaffle
  [EU] Z-Wave module tutorials? meowbot 2 5,259 09-13-2016, 07:54 PM
Last Post: Ghost
  New module: POT board Crispin 25 39,748 07-12-2016, 08:47 PM
Last Post: khgoh

Forum Jump:


Users browsing this thread: 2 Guest(s)