01-28-2016, 11:35 PM
(This post was last modified: 01-29-2016, 12:03 AM by Nilocsemliw.)
Yes, it should but you would still need to have at least 4 USB ports on the board it currently only ships with two USB ports here is a USB hub on Amazon
http://www.amazon.com/Sabrent-4-Port-Ind...sb+hub+usb
You could run the USB hard drive directly off the board and plug everything else you need to use into this
You would also need something like this USB SD card reader if you don't already have one http://www.amazon.com/IOGEAR-MicroSD-Rea...ard+reader
Oh and whatever your external hard drive uses power wise will need to be less than the maximum USB power output on the Pine 64 or have some kind of supplemental power
http://www.amazon.com/Sabrent-4-Port-Ind...sb+hub+usb
You could run the USB hard drive directly off the board and plug everything else you need to use into this
You would also need something like this USB SD card reader if you don't already have one http://www.amazon.com/IOGEAR-MicroSD-Rea...ard+reader
Oh and whatever your external hard drive uses power wise will need to be less than the maximum USB power output on the Pine 64 or have some kind of supplemental power