Broken boot: What am I missing?
#2
Well, you must have a uboot somewhere to get that output, on emmc or SPI
try (at uboot prompt) mmc list and printenv ...... see what boot_arguments are
put in a uSD and mmc list to see if it is recognized (or reboot),,,
then,,,, setenv boot_arguments mmc1 ,,, then,,, boot
you may wish to replace that uboot
----
there are disable emmc pins near emmc socket and SPI clock can also be shorted (to ground, this disables it)
  Reply


Messages In This Thread
Broken boot: What am I missing? - by mkosarek - 09-07-2023, 11:56 AM
RE: Broken boot: What am I missing? - by wdt - 09-08-2023, 08:14 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  enble boot after power loss/restore dkebler 18 8,677 12-04-2023, 12:14 PM
Last Post: ok38
  Mainline U-Boot with SPI, NVMe and SATA boot support sigmaris 108 114,279 09-25-2023, 12:46 AM
Last Post: ChriChri
  Unable to boot Armbian on new RockPro64 mooseball 5 3,984 07-14-2023, 08:59 AM
Last Post: rockjonn
  no boot white led flashing moserwi 7 3,966 05-18-2023, 10:46 AM
Last Post: wdt
  u-boot locked on pine64pro ljones 1 1,431 09-06-2022, 10:32 AM
Last Post: ljones
  Cannot get my board to boot deutschlmao 11 7,631 09-05-2022, 04:23 PM
Last Post: ljones
  U-BOOT Tutorial hazz 0 1,083 07-19-2022, 10:48 PM
Last Post: hazz
  Installation Debian on emmc: which U-Boot and where? vongillus 3 2,605 07-02-2022, 09:24 AM
Last Post: dkebler
  ROCKPRO64 PCI SSD SD-boot Install pspgarret 0 1,085 06-09-2022, 10:56 AM
Last Post: pspgarret
  RockPro64 has no white led, nor will it boot past... AnjinMeili 2 1,855 05-31-2022, 09:19 AM
Last Post: Rocklobster

Forum Jump:


Users browsing this thread: 1 Guest(s)