07-14-2016, 04:46 PM
(This post was last modified: 08-13-2016, 09:55 PM by MarkHaysHarris777.)
This is my favorite PI Bus pinout diagram, from the people at www.raspberrypi-spy.co.uk
The pinout is oriented the same way the pins are oriented if you look at the PineA64 board with the Euler bus at the bottom and the PI bus at the top.
This pics is good because it helps keep the special functions clear by color from the general pins, and from the grounds (all eight of them).
marcus
EDIT: NOTE: GPIO04 pin(7) cannot be used with RPi.GPIO-PineA64 with the current dts|dtb. Pin(7) is PL10 on the pine board, which is the S_PWM, for use as the LCD backlight brightness pulse width modulation.