Debian base(102) n xfce(101) does not boot

I have downloaded debian base and xfce images from and followed the 'getting started' linux instructions for dd'ing. Using either of these images to boot Pine64 causes the pwr LED to go out after about 2 seconds.

I have two 2GB boards which boot correctly with RemixOS or Android on SDcards provided by Pine64. Now I am using different SDcards for Debian but they are new Samsung EVO class 10 cards purchased from Newegg. I'll review the wiki about counterfeit cards though I think that is a dead end.

Other thoughts:

- MD5 good.
- e2fsck -nf good on ROOTFS.

# lsblk /dev/sdf
sdf      8:80   1 29.8G  0 disk 
├─sdf1   8:81   1   50M  0 part 
└─sdf2   8:82   1    3G  0 part



PS. dd with bs=1m returns 'invalid number'. 1M worked. (From the 'Getting started' instructions.)

Messages In This Thread
Debian base(102) n xfce(101) does not boot - by HenryD - 07-09-2016, 01:56 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Debian installer on Pine A64+ but no hdmi mrwick 1 4,701 07-28-2020, 01:49 PM
Last Post: kuleszdl
  Debian Pine64 h264/5 Video under vlc ozcy 6 12,283 04-15-2020, 05:27 AM
Last Post: dmitrymyadzelets
  OMV/debian/systemd: how to start the network kittyland 0 2,803 12-10-2019, 05:29 PM
Last Post: kittyland
  Debian 10 (Buster) in deep freeze - includes support for Pine64+ amp 5 9,635 07-22-2019, 09:29 PM
Last Post: amp
  Pine64 Debian Stretch/mainline [4.14.7] CallMeFoxie 50 116,855 07-22-2019, 09:24 PM
Last Post: amp
  Installing Debian with the Debian Installer (Buster RC1) amp 1 4,571 06-28-2019, 12:35 PM
Last Post: Kaarme42
  Script to build pure Debian images for Pine64+ amp 1 3,995 05-01-2019, 09:09 PM
Last Post: tllim
  Debian (Stretch) for Pine64-LTS wgray 2 5,995 04-04-2019, 09:54 PM
Last Post: wgray
  Is there just one fuctioning Debian Desktop image? KNERD 7 12,587 03-29-2019, 02:00 AM
Last Post: desai_amogh
  (ARCHIVED) Debian Jessie Images (3.10.102 BSP Kernel) New Release 259 441,112 05-21-2018, 06:30 AM
Last Post: Luke

Forum Jump:

Users browsing this thread: 1 Guest(s)