(08-11-2021, 03:46 PM)james8880 Wrote: I am making this a new post on this topic so that the post stands out more. I had replied to someone and the reply was not so visible.
----- below is what was in my reply ----
If you are able to try what I posted here (as user "sssmack" ), let me know how it goes. I am curious whether it works for you. You can try it with your Pine64 hub. I had issues with my pine hub and so I got one made by Ankler that had no issues. But read my post because there was more for me to work out than only the hub.
Hi James,
Thank you for replying, well I've tried all the same steps you showed but unfortunately none of them works, and with all steps, I mean all of what you've posted here, I used the same OS Version than you.
Additional to that I tried with:
+ Different OS (all the OS and its version other people recommended on this forum).
+ Different power adapters:
1) ANKER Power Port6
2) Power Port II PD (can pump different current levels thorugh PD or IQ port)
3) Aukei QC 3.0
4) PowerBank Aukey PB-T3 with QC 2.0 (can pump different current levels through Fast Charge port and Quick Charge 2.0 Port)
That means there was plenty of power to be used by the phone. I also tried manually changing the PD current limit and set it to different levels 2A, 3A, 4A, 5A.
+ Different battery levels --> 10%::5%::100%
+ Different USB Cables:
1) Apple USB Type-C
2) Amazon Basics USB A to Type-C 3.1 Gen2
3) Original/Included USB Cable(Red one)
4) USB Case logic cable 3.0 A to to C
5) Generic USB Type-C A to C 2.0
+ Different HDMI TVs and Monitors.
+ And last but not least I come back to an old OS per one user recommended on this forum, and manually flashed the latest FW for the ANX7688
I don't really want to explain how exactly I've conduced each of the tests, but belive me it was more than enough: rebooting with adapter('convergence pack' and 'Anker HUB'), without the adapter('convergence pack' and 'Anker HUB'), with the external PSU(different chargers), with different battery levels, with different cables a mix between each other, etc.] and for godsake it looks like there's no combination on this world that can make this phone shows any video output through the HDMI.
As a result the DP state never went all the way up to 0x06, only reach 0x03 and that's all.
And again James, thank you for replying.
So if you or someone else has more ideas, they're welcome.
BTW: I don't know what happened to the previous links, but here they are:
dmesg_using_anker_usb-c_adapter
dmesg_using_convergence_adapter
Power Adapter
Power Adapter