how to make it run?
#2
I had a similar problem. Same situation, SOEdge module in a clusterboard.

I flashed the factory test build image on the wiki to an eMMC module using the USB-to-eMMC adapter available in the store. What resulted had no partitions and did not boot at all. I was not even able to read the eMMC's contents after flashing. So, I figured the USB-to-eMMC adapter is not the right way to go for this image.

Then I tried the method mentioned in the guide using a Rock64. Good thing I had one of those to try! But, alas, I got the same result. After flashing the image, there was nothing readable or bootable on the eMMC.

Then, I bit the bullet, set up an Ubuntu 16.04 virtual machine (the SDK suggests/requires it), and built an image using the SDK. After a rather long build, I wound up with a set of images that needed to be flashed to the eMMC. I followed the instructions in the SDK and flashed the images using the Rock64 again, and still nothing winds up readable or bootable on the eMMC.

I am clearly doing something wrong. All of my experience with eMMCs on the Pinebook and Rock64 (and many other non-Pine boards) is not helping me here at all. It seems like the flashing process is not doing what it is supposed to.

I am going to order a SOEdge baseboard soon. Maybe I need one of those too, just to get the modules up and running? Any clues would be much appreciated.
  Reply


Messages In This Thread
how to make it run? - by alembiq - 06-10-2021, 12:40 PM
RE: how to make it run? - by KRT - 06-10-2021, 08:30 PM
RE: how to make it run? - by alembiq - 08-06-2021, 08:18 AM
RE: how to make it run? - by KRT - 08-15-2021, 09:11 PM
RE: how to make it run? - by KNERD - 11-02-2021, 09:03 AM
RE: how to make it run? - by KRT - 11-02-2021, 06:58 PM
RE: how to make it run? - by KNERD - 11-02-2021, 07:29 PM
RE: how to make it run? - by KRT - 11-02-2021, 11:09 PM
RE: how to make it run? - by KNERD - 11-23-2021, 09:22 AM
RE: how to make it run? - by KNERD - 02-20-2022, 01:51 PM
RE: how to make it run? - by revoman - 04-18-2022, 09:10 PM
RE: how to make it run? - by KNERD - 04-18-2022, 09:13 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)