Rubber feet coming off
12-07-2020, 02:22 PM
Right, so you replace them with feet that are held on with screws through the holes.
I wonder what would happen if you clean off all of the old glue with solvents, then use super glue. That Cyanoacrylate stuff: https://en.wikipedia.org/wiki/Cyanoacrylate It's infamous for gluing fingers together but acetone (or nail polish remover) will cut it. It bonds quickly but gets stronger on setting. If you turned the PBP upside down and stuck the feet on, then covered them with waxed paper and weights to hold them down, let it sit overnight,that would maybe be best. It needs time to cure especially if there's a thick layer of it.
I wonder what would happen if you clean off all of the old glue with solvents, then use super glue. That Cyanoacrylate stuff: https://en.wikipedia.org/wiki/Cyanoacrylate It's infamous for gluing fingers together but acetone (or nail polish remover) will cut it. It bonds quickly but gets stronger on setting. If you turned the PBP upside down and stuck the feet on, then covered them with waxed paper and weights to hold them down, let it sit overnight,that would maybe be best. It needs time to cure especially if there's a thick layer of it.