Happy eMMC and SDcard OS usage for Pinebook Pro Newbies...
#1
Hello team Pine64:

I hope that this small write-up has relevance and information that will help newcomers to the land of PBP who want to experiment with other operating softwares on the platform. I've been reading many horror stories of Pinebook Pro's that were damaged, or that the owner THINKS are damaged because they won't boot properly... after a user found themselves with an inoperable OS on their internal eMMC storage.

It seems that once a rookie user has an issue with their eMMC the first thing they do is open the laptop and flip the reset button next to the eMMC storage. This isn't always necessary. I wanted to go over how I reinstalled the original [or updated, if you have an older version of the PBP] Manjaro OS back onto the eMMC without opening the system. From what I can gather, you can certainly open the system and access the internals to get things done - and in some cases this needs to happen... but I'd be willing to bet that in most rookie scenerios, this isn't the case.

Furthermore, I'd like to state an easier way to experiment with other OSes rather than modifying the eMMC in the first place. Sure, if you have come across an OS build that you want to run in production, forever, I understand putting that on the eMMC... but I think people get into trouble with their PBP because they just want to play around, try to throw a new OS on the eMMC and don't have all the Linux knowledge needed to doso - ending in 'a boat anchor' or being upset with the hardware.... that did nothing wrong. It only does what we tell it to, and follows directions - even if the Pine64 'outline' isn't perfect. The proper way to play around with OSes is to burn them to an SDcard and boot it up; if anything fails or doesn't operate correctly, you just take it out and smile because you know the next boot will be your perfect Manjaro install on eMMC.

There is a whole list of OSes on the wiki:
https://wiki.pine64.org/index.php?title=..._Downloads

You can download any one of these, and I prefer to doso on a different system but you can certainly doso on the PBP and use dd if= of= to burn your SDcard, and use a software like Balena Etcher or any SDcard burner and burn the ISO to the SDcard. Just pop that SDcard in the slot of the PBP and go have fun... play with that OS, dig into it... mess it up even! [With the understanding that you leave the eMMC storage alone, and don't much with IT!] You can always simply pop that SDcard out and boot right back into your Manjaro build. Simple pimple.

Now, if you do happen to mess up the build on eMMC don't immediately grab a screwdriver and get all hardware happy and think that you're a Linux-ninja. It isn't necessary! [For most of us, anyway...] In fact, if you mess up the eMMC at all lets set the PBP to the side for a few minutes and settle down. Tongue Go over to the wiki, at the same link I posted above, and download the Manjaro ARM with KDE Plasma MicroSD and eMMC Boot Direct Download from Manjaro... unzip it, grab the .ISO and burn that to an SDcard... heck, you can even use dd if= of= if you just have to feel like a CLI rockstar. Boot from that Manjaro SDcard and update the system thru the dock, the pamac GUI software utility or by 'sudo pacman -Syyu'. Next install 'manjaro-arm-flasher' with pamac or pacman... run manjaro-arm-flasher. Select pinebook pro, KDE Plasma, 20.08 and mmcblk2.

Important: If you don't see mmcblk2, but rather boot1 or boot2 - don't select that! You can find more info at the thread link below, but since you should be doing this from an SDcard, I don't think you should see this:
https://forum.manjaro.org/t/manjaro-arm-flasher/26002

Anyway tho, if it does list boot1 or boot2 you need to unmount the eMMC before flashing! So long as you see mmcblk2 and select it, make sure you have ample battery charge and the laptop is plugged in, and click Start... let it do its thing.

When finished, you can shutdown. Take out the SDcard and when you reboot the Pinebook Pro you should have a copy of Manjaro ARM booting from eMMC with no SDcard inserted.

The Pinebook Pro is just as it comes from the factory. [At least if you have the newest PBP available.] Again, 'sudo pacman -Syyu' and your done.

Personally, I'd suggest keeping Manjaro ARM on the eMMC and play around with other OSes on SDcards... this ensures that you don't ever have to go deeper before you want to. You shouldn't HAVE to open the PBP or flip the eMMC switch unless you've already messed with things and now have a bigger problem to fix.

Even if so, don't give up... we can get your PBP back to factory settings with Manjaro ARM on the eMMC... these machines only do what we tell them to; and only respond to events that we create... so when you go deeper you just get further into a situation that is harder to back out of.

Remember you have a community here to help you; and I will, along with an army of other REAL Linux-rockstars. All we have to do is get you backed out of what you created. Tongue If you just follow these basic set of baseline rules, you'll never get there! If you find an OS that you just love, like I really like Armbian, we can put that OS on the eMMC... and you can still experiment with others, using SDcards! We just have to feed the computer the correct instructions - it WILL respond and function.

Anyway, I hope this long ass write-up helps someone so that they don't get down the rabbit hole. We got this...
-----
 pAULIE42o
.  .  .  .   .  . .
/s
  Reply


Messages In This Thread
Happy eMMC and SDcard OS usage for Pinebook Pro Newbies... - by Paulie420 - 09-28-2020, 05:00 PM
Booting from SD - by rkharris - 11-28-2020, 05:46 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  looking to buy one pinebook pro (mainland China) duanduan 3 1,917 03-21-2024, 07:44 PM
Last Post: wangyukunshan
  Cellular module for Pinebook Pro Lotech 1 305 03-05-2024, 05:40 AM
Last Post: KC9UDX
  Screen on pinebook stays black but can ssh into machine tuxxpine 0 240 02-23-2024, 04:22 PM
Last Post: tuxxpine
  Sale my ANSI PineBook Pro cuthbertdavies 0 231 02-14-2024, 09:12 PM
Last Post: cuthbertdavies
  Compiling with -j6 on the Pinebook Pro (Overheat) KC9UDX 0 168 02-14-2024, 09:01 AM
Last Post: KC9UDX
  Pinebook Pro in EU for Sale - €90 jan_vdk 2 558 02-07-2024, 02:12 AM
Last Post: 23Ro
  Pinebook Pro for sale tomekdev 2 623 02-01-2024, 11:35 AM
Last Post: tomekdev
  Video Editing Is Possible On The PineBook Pro! ImmyChan 10 7,241 12-17-2023, 09:29 PM
Last Post: insideau786
  Brand new Pinebook Pro doesn't boot after Manjaro update johnboiles 8 2,001 12-15-2023, 02:11 PM
Last Post: wdt
  Selling my Pinebook Pro with a bootable NVMe WD SSD drive pinemouth 0 706 09-27-2023, 08:53 PM
Last Post: pinemouth

Forum Jump:


Users browsing this thread: 1 Guest(s)