eMMC to USB adapter "very" slow at reading data
#4
On a side note I'm getting around 50MB/s when dd'ing the data over ssh
(with a 1Gb/s ethernet connection with quite a lot of other traffic, and ssh did not use 100% of one CPU)

sudo dd if=/dev/mmcblk2 | ssh 192.168.9.30 dd of=/dev/null
965813760 bytes (2.0 GB, 1.8 GiB) copied, 37.0941 s, 53.0 MB/s

It seems that piping it through 'gzip -1' and 'zcat' only reduces the thoughput .

So perhaps I should just use the Pinebook Pro (booted of a SD card) as the eMMC reader


Messages In This Thread
RE: eMMC to USB adapter "very" slow at reading data - by talpa - 07-08-2020, 08:55 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Upgrade eMMC card - boot problems alpopa 0 818 09-16-2020, 12:31 PM
Last Post: alpopa
  128GB eMMC support dgkPBP 7 2,638 09-08-2020, 07:36 AM
Last Post: KC9UDX
  Manjaro 20.06 requires multiple boots from eMMC to launch successfully on PBP Spectre 0 927 07-09-2020, 06:12 PM
Last Post: Spectre
  LTE adapter via NVMe grego 2 1,738 07-08-2020, 01:37 PM
Last Post: manawyrm
  Pro NVMe adapter Does not fit ! ? bcnaz 110 46,027 07-03-2020, 10:51 PM
Last Post: xmixahlx
  m.2 adapter board screw missing? screamy 4 2,014 07-01-2020, 08:37 PM
Last Post: screamy
  SSD Adapter MIA noeman5 3 1,807 06-16-2020, 09:21 AM
Last Post: noeman5
  Internal installation of additional eMMC Besouro 7 3,016 06-06-2020, 09:33 PM
Last Post: xmixahlx
Lightbulb Hacking the Ill-Fitting NVMe Adapter diodelass 0 1,001 06-03-2020, 03:15 PM
Last Post: diodelass
  NVMe SSD Interface Adapter linuxfreund 1 1,311 06-02-2020, 06:31 AM
Last Post: tophneal

Forum Jump:


Users browsing this thread: 1 Guest(s)