External USB C Monitor not working

[altacus]

I am trying to get a Lenovo ThinkVision USB C monitor working with my pinebook pro running debian w/the manjaro 5.7 kernel.

when I plug in the monitor dmesg produces

Code:

[  760.964053] usb 7-1: USB disconnect, device number 32
[  760.964163] usb 7-1.3: USB disconnect, device number 33
[  760.967215] usb 7-1.4: USB disconnect, device number 34
[  760.973941] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[  760.980924] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[  765.823271] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[  766.150886] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[  766.218518] typec_displayport port0-partner.0: No compatible pin configuration found:0000 -> 000c, 001c <- 0000
[  767.151965] usb 7-1: new high-speed USB device number 35 using xhci-hcd
[  767.345096] usb 7-1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.23
[  767.345106] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  767.345111] usb 7-1: Product: 4-Port USB 2.0 Hub
[  767.345115] usb 7-1: Manufacturer: Generic
[  767.408343] hub 7-1:1.0: USB hub found
[  767.409572] hub 7-1:1.0: 4 ports detected
[  767.791792] usb 7-1.3: new full-speed USB device number 36 using xhci-hcd
[  767.931623] usb 7-1.3: not running at top speed; connect to a high speed hub
[  767.940423] usb 7-1.3: New USB device found, idVendor=17ef, idProduct=a361, bcdDevice= 3.00
[  767.940447] usb 7-1.3: New USB device strings: Mfr=17, Product=18, SerialNumber=19
[  767.940464] usb 7-1.3: Product: BillBoard Device
[  767.940478] usb 7-1.3: Manufacturer: Realtek
[  767.940493] usb 7-1.3: SerialNumber: 123456789ABCDEFGH
[  768.251772] usb 7-1.4: new high-speed USB device number 37 using xhci-hcd
[  768.395625] usb 7-1.4: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.23
[  768.395649] usb 7-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  768.395665] usb 7-1.4: Product: 4-Port USB 2.0 Hub
[  768.395680] usb 7-1.4: Manufacturer: Generic
[  768.432313] hub 7-1.4:1.0: USB hub found
[  768.433595] hub 7-1.4:1.0: 2 ports detected

A diff of lsusb reveals 

Code:

Bus 007 Device 028: ID 0bda:5411 Realtek Semiconductor Corp.
Bus 007 Device 027: ID 17ef:a361 Lenovo
Bus 007 Device 026: ID 0bda:5411 Realtek Semiconductor Corp. 4-Port USB 2.0 Hub

Is there any particular firmware/module that I'm missing? I haven't been able to find anything.

Thanks in advance!