0.7.10 pre-release
#1
0.7.10 pre-release images are now available for download.
You can find me on IRC, Discord and Twitter


#2
Hope it is just me: downloaded bionic minimal, dd to my old eMMC, boots OK to a login prompt but rock64/rock64 not valid!
  • ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Arch (6.2 kernel, Openbox desktop) for general purpose daily PC.
  • PinePhone Pro Explorer Edition, daily driver, rk2aw & U-boot on SPI, Arch/SXMO & Arch/phosh on eMMC
  • PinePhone BraveHeart now v1.2b 3/32Gb, Tow-boot with Arch/SXMO on eMMC
#3
Interesting - I have no means of checking right now, but hopefully we get more feedback..
You can find me on IRC, Discord and Twitter


#4
I am interested in this, I can try it tomorrow morning.
#5
It is me - sorry. Have logged in to bionic minimal & stretch minimal fine now.

Not sure what my setup gets wrong but no matter. (t is something weird if I leave my SDcard in - if I remove it all is fine with 0.7.10 on the eMMC.)

But for sure there are problems with sound as per other threads: install mpv libdrm-rockchip1 and libmali-rk-midgard-t86x-r14p0-gbm, setup .asoundrc for card 1 to play through hdmi. rkmpv yourmovie.mp4 plays fine first time. goes ultra slow thereafter with noise in the log file. As per this post.
  • ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Arch (6.2 kernel, Openbox desktop) for general purpose daily PC.
  • PinePhone Pro Explorer Edition, daily driver, rk2aw & U-boot on SPI, Arch/SXMO & Arch/phosh on eMMC
  • PinePhone BraveHeart now v1.2b 3/32Gb, Tow-boot with Arch/SXMO on eMMC
#6
(10-08-2018, 04:46 PM)dukla2000 Wrote: Not sure what my setup gets wrong but no matter. (t is something weird if I leave my SDcard in - if I remove it all is fine with 0.7.10 on the eMMC.)


Does the sdcard have a bootable image on it? If so it could be a race condition between which root is mounted.
#7
(10-08-2018, 04:52 PM)evilbunny Wrote:
(10-08-2018, 04:46 PM)dukla2000 Wrote: Not sure what my setup gets wrong but no matter. (t is something weird if I leave my SDcard in - if I remove it all is fine with 0.7.10 on the eMMC.)


Does the sdcard have a bootable image on it? If so it could be a race condition between which root is mounted.
Yup - the SDcard is my usual boot but it calls for rootfs on the NVMe. (And the eMMC is normally unplugged else I cant boot 4.18 or 4.19.)

At the moment really perplexed: my understanding of the RockPro64 says the eMMC takes preference in all cases, all ways, if it is present. Now I do know that I have hacked my eMMC mercilessly trying to sort out what is wrong booting 4.18 or 4.19, including some low-level hacks on the (eMMC) boot sections.

But the giveaway symptom is this: on my normal setup my machine name is rpro64 (not the default rockpro64). If I dd 0.7.10 to the eMMC and reboot with the SDcard in, the login prompt is for rockpro64 but rock64/rock64 does not work. (Nor does my normal userid/password which are both changed from the default.) But the real giveaway was when I tried stretch - the line above the login prompt was for ubuntu 18.04. Which lead me to remove the SDcard and all was as expected.

Puzzling but as I say (I think) irrelevant as a comment on 0.7.10!
  • ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Arch (6.2 kernel, Openbox desktop) for general purpose daily PC.
  • PinePhone Pro Explorer Edition, daily driver, rk2aw & U-boot on SPI, Arch/SXMO & Arch/phosh on eMMC
  • PinePhone BraveHeart now v1.2b 3/32Gb, Tow-boot with Arch/SXMO on eMMC
#8
I've already done that experience too. And before 0.7.10
Sorry for any mistakes. English is not my native language

1. Quartz64 Model B, 4GB RAM

2. Quartz64 Model A, 4GB RAM

3. RockPro64 v2.1

https://linux-nerds.org/
#9
(10-08-2018, 09:29 PM)Bullet64 Wrote: I've already done that experience too. And before 0.7.10
Good to hear - it is not just me! And it is not 0.7.10.

I can confirm 0.7.10 fixes the mainline eMMC issue: starting from my plain 0.7.10 installation, installing 4.19.0-rc4-1071 reboots fine into 4.19 Smile 

Sadly at 4.19 no soundcards at all - as above sound problems at 4.4.154-1122 (stock 0.7.10) as well.
  • ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Arch (6.2 kernel, Openbox desktop) for general purpose daily PC.
  • PinePhone Pro Explorer Edition, daily driver, rk2aw & U-boot on SPI, Arch/SXMO & Arch/phosh on eMMC
  • PinePhone BraveHeart now v1.2b 3/32Gb, Tow-boot with Arch/SXMO on eMMC
#10
Hello,
 on 4.4.154-1122 I got no hdmi-sound, mpv with mpp is no longer working. Also the cpu-fan is barely moving when I fiddle with  pwm-fan/hwmon/hwmon0/pwm1
All of that was no problem with 4.4.138-1094  Can someone confirm this or is it just me?
TIA,
hunderteins


Possibly Related Threads…
Thread Author Replies Views Last Post
  Armbian 22.02 Release Announcement TRS-80 0 1,111 02-28-2022, 05:08 PM
Last Post: TRS-80
Big Grin Feature Complete Debian Desktop Release Mrfixit2001 158 175,811 05-29-2021, 04:05 AM
Last Post: twilite
  Official Debian release won't boot!?! Faradn 4 6,588 07-06-2020, 09:29 AM
Last Post: Bullet64
  UART4 in Debian Desktop Release of Mrfixit2001 Gienek 1 2,757 05-19-2020, 02:47 AM
Last Post: Gienek
  New Pre-release 0.10.9 from Ayufan Bullet64 0 2,329 04-09-2020, 06:49 AM
Last Post: Bullet64
  Ayufan 5.4.0 rc1 release - cannot boot Mentaluproar 2 5,047 01-05-2020, 02:39 PM
Last Post: mmiigg
  Release 0.9.14 Ubuntu Mate desktop, LXDE, OMV, Docker CE (container) Luke 1 3,243 12-10-2019, 01:30 PM
Last Post: Helium75
  New Stable release from Ayufan (0.8.3) Luke 13 17,095 08-06-2019, 05:19 PM
Last Post: andyburn
  ayufan 0.7.12 pre-release images (help testing) Luke 11 13,150 03-22-2019, 05:10 PM
Last Post: Luke
Star 0.7.9 Linux release from ayufan Luke 48 70,768 02-25-2019, 02:55 PM
Last Post: Luke

Forum Jump:


Users browsing this thread: 1 Guest(s)