7" LCD wooden framen enclosure for Pine64 *UPDATED WITH
#1
Video 
Hello everyone!!

I have designed and built a enclosure model to house the 7 "LCD Touch screen and the Pine64 computer.
It is made of birch wood.
[Image: 91jUZ07XnTL._SL1500_.jpg]

In principle you do not need to use glue to put the pieces together. Only 8 screws and nuts.

It has two lower and one upper lid For easy access
[Image: 91klnNb2UiL._SL1500_.jpg]

At the bottom of the enclosure , the LIPO battery can be housed.

[Image: 91ng7dIdN3L._SL1500_.jpg]


[Image: 91i3ylg0gUL._SL1500_.jpg]
It has the perfect angle to see the screen, in landscape or vertical mode ..
To read ebook, etc ...

It has small openings for ventilation.
[Image: 91ob8%2Burj3L._SL1500_.jpg]
We have made holes for you to screw, one mini fan of 25mm x10mm 5VDC very common

The pieces are not sanded or varnished.

So you can give your personalized touch.

We will try to make a video of the process of mounting, So that it is available for all those who need help.

So if you are interested, they are available in AMAZON
7" LCD Touch screen wooden frame and pine 64 case


I hope you like it...

Thanks to the Pine64 team for their support To carry out this new project. Heart
  Reply
#2
Looks really good, great work!
  Reply
#3
(02-06-2017, 05:29 AM)mbt28 Wrote: Looks really good, great work!

Thank you,
It cost me to make some previous prototypes.. 4.. Huh
So I use the LCD ribbon cables that the 7 "LCD kit carries.

And being very short. Does not give many possibilities to place the Pine64 board In other ways.
But I'm satisfied, you're already inclined to can use it to read ebook, watch video, etc ...

If you are sitting (for example on the bus), you can attach it between your legs and your hands are free to write, etc ...

Although logically the tablet is thin, etc ...

This woodencase design for me is easier to grasp with one hand the wooden frame,
Because you do not touch the screen with that hand and you do not interfere as I sometimes do
On the tablet  Tongue


Now I have to make a video, of the process of assembly, which is something that is easy, but if you see how it is done, it is easier
To perform...
We continue working  In this model ...
  Reply
#4
Hi,

But How did you fixed the touch panel? With glue?
  Reply
#5
(02-06-2017, 06:58 AM)mbt28 Wrote: Hi,

But How did you fixed the touch panel? With glue?

No, I do not use glue.

It is by pressure, the adjustment with the framework is the key.
  Reply
#6
Very nice! Digging the fact that it's slanted for easy viewing. Well done.
+1 me if I have helped you in any way. Thank you.
  Reply
#7
Video 
(02-07-2017, 08:50 PM)Bluphire Wrote: Very nice! Digging the fact that it's slanted for easy viewing. Well done.

Thank's  Bluephire...

I made a video about the process of assemble...

I hope you understand something, because I do not speak English and
I used google's A.I. to dictate the text and then translate it into English. Big Grin

LCD case assembly process VIDEO

Thanks for watching!


Ebay sales
  Reply
#8
Just saw this thread. Great work Killor !
You can find me on IRC, Discord and Twitter


  Reply
#9
(02-08-2017, 07:18 AM)Luke Wrote: Just saw this thread. Great work Killor !

Thank you!

I wanted to make a enclosure design a little different from the other case that already exist, without losing its functionality.
My father now uses it to read the ebooks and so he does not have to ask me for the tablet. Tongue
  Reply
#10
Hi !!

We still have some units available in EUROPE AMAZON warehause for sale.

Currently for orders ordered from US.
We have to send it from Spain. Because

Well, AMAZON's AI computer reads the word "LIPO Holder" and he believes
that I also send BATTERIES (the latter is not true) and
it is not allowed to send batteries to the AMAZON store without special permission. Huh


[Image: 911RderW-UL._SL1500_.jpg]
Kit only sold for mounting the case,  LCD, Pine64 and lipo battery are not included.

Since I do not speak English very well,

If you have any questions, ask before ...
Thanks... Big Grin

EBAY site

USA AREA       : LCD wooden frame CASE for Pine64

EUROPE AREA  :  LCD wooden frame case for Pine64
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Are the Pine64 Acrylic Open Enclosures Stackable? abhinava 5 10,460 09-17-2020, 06:41 AM
Last Post: dabou
Big Grin Super Mario case [NOW WITH UPDATED STL-FILE (April 27.)] Tarjei85 37 69,197 07-23-2020, 05:31 AM
Last Post: devendraraju
  Made a case for the Pine64 with Audio DAC installed kodachrome 1 4,283 11-12-2019, 04:52 AM
Last Post: xalius
Lightbulb Perfect ABS Plastic Server Enclosure from Radio Shack MarkHaysHarris777 14 35,841 09-11-2017, 11:39 AM
Last Post: stuartiannaylor
  A case with active cooling for 1Gb pine64 ishwest 5 10,858 06-28-2017, 04:05 AM
Last Post: ishwest
Rainbow (Cluster) Modified Playbox Enclosure Progress predominant 3 5,977 06-17-2017, 01:29 AM
Last Post: pfeerick
  Nostalgic enclosure VHS carlo318 4 8,125 03-05-2017, 04:56 PM
Last Post: carlo318
  How is the battery Supposed to be mounted in the PlayBox enclosure? dbarbee 2 6,130 02-12-2017, 10:17 PM
Last Post: tllim
  Enclosure for flush-mounting the 7" touchscreen Learnincurve 9 14,006 02-07-2017, 08:45 PM
Last Post: Bluphire
  Official C4 Labs LCD Enclosure *UPDATED WITH ASSEMBLY VIDEO* Bluphire 12 26,662 01-06-2017, 03:15 AM
Last Post: Learnincurve

Forum Jump:


Users browsing this thread: 1 Guest(s)