VESA mount enclosure
#1
I was wondering if the PINE team (or even a third party) was planning on making an enclosure compatible with VESA for mounting the PINE 64 to the back of a monitor?

I have a similar enclosure for Raspberry Pi, and it is very handy for having a nice low profile low power computer for internet browsing, watching, movies, etc. Similar to this: https://www.adafruit.com/products/2534
  Reply
#2
(01-27-2016, 03:58 PM)john Wrote: I was wondering if the PINE team (or even a third party) was planning on making an enclosure compatible with VESA for mounting the PINE 64 to the back of a monitor?

I have a similar enclosure for Raspberry Pi, and it is very handy for having a nice low profile low power computer for internet browsing, watching, movies, etc. Similar to this: https://www.adafruit.com/products/25

I believe there was some mention of a VESA mount in one of the kickstarter updates, I'll try to track it down...

...yes! Here it is, update #11:
https://www.kickstarter.com/projects/pin...ts/1449625

- John Yendt on December 22 -
"Just another thought, perhaps a case that can VESA mount to the back of a monitor."

- PINE64 Inc. on December 23 -
"@john yendt, we're working with another company to develop a VESA mount already."
  Reply
#3
Thanks for looking for that and linking it! For the record, I'm not the same John as Mr. Yendt.
  Reply
#4
We have plan to do the Vesa mount but only available on March or April timeframe.
  Reply
#5
tlliim: are there going to be standard dimensions available soon? I would like to be able to start designing my own case but have had trouble finding any real specifications on mounting hole locations and other critical dimensions.
  Reply
#6
tlliim: are there going to be standard dimensions available soon? I would like to be able to start designing my own case but have had trouble finding any real specifications on mounting hole locations and other critical dimensions.

If you just need the outter dimension and hole position, the Rev A and rev B are the same.
  Reply
#7
(02-01-2016, 11:30 PM)tllim Wrote: tlliim: are there going to be standard dimensions available soon? I would like to be able to start designing my own case but have had trouble finding any real specifications on mounting hole locations and other critical dimensions.

If you just need the outter dimension and hole position, the Rev A and rev B are the same.

Try this link: http://wiki.pine64.org/images/7/74/Pine6...ension.JPG
If I've helped you with something, please leave a rating for my responses.
  Reply
#8
Sounds promising! Otherwise I will be getting a VESA adapter plate and mount a standard case onto it Smile.
  Reply
#9
Hi !

I also make some open enclosure models.. (Still in development)

The bottom is somewhat larger than the top. In order to adapt the VESA holes.  (100mm x 100mm) and (75mm x75mm)

   

   

I used 4 hexagons nylon spacers 25 mm long

At the top will be the button battery holder for RTC and I am waiting to receive the mini fans to cooling.


Bye!!
  Reply
#10
(01-27-2016, 03:58 PM)john Wrote: I was wondering if the PINE team (or even a third party) was planning on making an enclosure compatible with VESA for mounting the PINE 64 to the back of a monitor?

I have a similar enclosure for Raspberry Pi, and it is very handy for having a nice low profile low power computer for internet browsing, watching, movies, etc. Similar to this: https://www.adafruit.com/products/2534

Here is a mount that we make - available on Amazon that works with any 100mm monitor.

http://www.amazon.com/ASG-Laser-VESA-Mou...B01DG5ITSU

or with a clear top to show off the Pine 64

http://www.amazon.com/VESA-Mount-Pine-64...B01DG5OZDI
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
Video 7" LCD wooden framen enclosure for Pine64 *UPDATED WITH killor 12 19,507 10-12-2018, 03:08 PM
Last Post: tllim
Lightbulb Perfect ABS Plastic Server Enclosure from Radio Shack MarkHaysHarris777 14 33,597 09-11-2017, 11:39 AM
Last Post: stuartiannaylor
Rainbow (Cluster) Modified Playbox Enclosure Progress predominant 3 5,339 06-17-2017, 01:29 AM
Last Post: pfeerick
  Nostalgic enclosure VHS carlo318 4 7,387 03-05-2017, 04:56 PM
Last Post: carlo318
  How is the battery Supposed to be mounted in the PlayBox enclosure? dbarbee 2 5,597 02-12-2017, 10:17 PM
Last Post: tllim
  Enclosure for flush-mounting the 7" touchscreen Learnincurve 9 12,761 02-07-2017, 08:45 PM
Last Post: Bluphire
  Official C4 Labs LCD Enclosure *UPDATED WITH ASSEMBLY VIDEO* Bluphire 12 24,607 01-06-2017, 03:15 AM
Last Post: Learnincurve
  VESA 100 Arm mounts rickseiden 11 18,106 12-31-2016, 11:01 AM
Last Post: androsch
  Tablet Enclosure Vachtra 11 19,605 12-20-2016, 07:17 AM
Last Post: Toriless
Rainbow PineA64 Home-Brew card-board Play Box for Android & LCD Enclosure MarkHaysHarris777 9 18,778 11-01-2016, 06:23 PM
Last Post: tllim

Forum Jump:


Users browsing this thread: 1 Guest(s)