no HDMI (DP) Output over Dock
#1
Hello,
I can't connect any extern HDMI output over the Dock:
 The DP state is always between:

Code:
anx7688 1-0028: DP state changed to 0x00

anx7688 1-0028: DP state changed to 0x02

anx7688 1-0028: DP state changed to 0x03



Code:
$ wlr-randr
DSI-1 "<Unknown> <Unknown>  (DSI-1)"
 Physical size: 68x136 mm
 Enabled: no
 Modes:
   720x1440 px, 60.006001 Hz (preferred)




is there anything possible to get HDMI/DP working / fix this Issue (I tried it with different Displays) in mobian (bullseye)?

Thank you!
  Reply
#2
I have this same issue, would love for mobian to work with the dock properly.
  Reply
#3
It would be nice, and even to know which part has to be replaced to get it working if there is no software solution.

i also reported it here but i'm not shure if it is the right place:
https://gitlab.com/mobian1/devices/pinep...-/issues/5
  Reply
#4
In another thread they were discussing this issue, try plugging it in with the back cover removed.

It seems the plug is just a little short on a few of these docks, removing the rear cover allows it to go in a little deeper.
      LINUX = CHOICES
         **BCnAZ**
               Idea
   Donate to $upport
your favorite OS Team
  Reply
#5
I already  tried plugging it in with the back cover removed (and todiffernt docks) it is the same.
The status is not going higher than
Code:
anx7688 1-0028: DP state changed to 0x03
I also tried with low battery (<37%) an with 2 Kernels (5.10 and 5.13).
  Reply
#6
I'm hoping it's a software issue because it wouldn't be very smart to market and sell a convergence package specifically for docking and displaying on a monitor if that package's hardware doesn't actually work for that purpose. It's like selling a car for driving without an engine. Just pointless.
  Reply
#7
There is an update about this issue:
https://xnux.eu/log/#045
  Reply
#8
there seems to be a working fix for kernel version 5.15
https://xnux.eu/log/#050

hopefully it will be merged in mobian....
  Reply
#9
By the way, if you switch off the PinePhone while HDMI is plugged in, do you get Mobian logo on the screen? (Also maybe after trying the force-on and override-EDID workaround). I do, which hopefully means that the hardware itself can output to HDMI. (At the same time 5.15 kernel from megous does not work properly with HDMI for me under postmarketOS — tried it there because the kernel packaging is a bit simpler)
  Reply
#10
I get now output with Fedora kernel which uses the 5.1.15 Kernel, so I hope it is just a matter of time when the fix gets into mobian
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Audio output switching anomalies treebeard 1 769 06-10-2024, 06:37 AM
Last Post: anonymous
  Dummy output HLing 0 1,463 06-22-2021, 11:04 AM
Last Post: HLing
  Ethernet through the dock? Diagon 22 22,609 01-25-2021, 01:05 PM
Last Post: zborgerd
  screen goes blank when I insert pinephone dock, or usb-a to usb-c adaptor rp3 3 3,883 01-12-2021, 05:06 AM
Last Post: rp3
  HDMI on Mobian sundog 2 3,543 09-08-2020, 09:19 AM
Last Post: sundog
  USB-C Dock and HDMI, revison 1.2 (Modded) Ersatz 5 8,353 08-05-2020, 11:57 AM
Last Post: Ersatz
  Video output scale after update 14/07/2020 antiX-Dave 3 5,215 07-16-2020, 04:32 AM
Last Post: a-wai

Forum Jump:


Users browsing this thread: 1 Guest(s)