First boot - no fan, no display... is it broken?
#1
Hi,

I just received my Rockpro64, I plugged the fan in, and then added the SATA adapter and some drives, plugged in the HDMI, made an armbian sdcard according to the instructions, and then plugged in the board with the power supply I ordered from Pine64.

I can hear the drives spin up, I see a little green light, but nothing else. The fan doesn't spin (is it supposed to?) I get nothing on the HDMI display.

What can I do to debug what is going on here?

Thanks!
  Reply
#2
An update to my issue.... it seems the problem was the wrong image was used to burn onto the SDcard. I had expected some kind of POST or something to suggest that things were functioning, but that is not the case. Once I burned the right image, things were able to boot.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  enble boot after power loss/restore dkebler 18 8,944 12-04-2023, 12:14 PM
Last Post: ok38
  Mainline U-Boot with SPI, NVMe and SATA boot support sigmaris 108 116,547 09-25-2023, 12:46 AM
Last Post: ChriChri
Bug Broken boot: What am I missing? mkosarek 1 607 09-08-2023, 08:14 AM
Last Post: wdt
  Unable to boot Armbian on new RockPro64 mooseball 5 4,086 07-14-2023, 08:59 AM
Last Post: rockjonn
  no boot white led flashing moserwi 7 4,108 05-18-2023, 10:46 AM
Last Post: wdt
  u-boot locked on pine64pro ljones 1 1,478 09-06-2022, 10:32 AM
Last Post: ljones
  Cannot get my board to boot deutschlmao 11 7,832 09-05-2022, 04:23 PM
Last Post: ljones
  U-BOOT Tutorial hazz 0 1,109 07-19-2022, 10:48 PM
Last Post: hazz
  Installation Debian on emmc: which U-Boot and where? vongillus 3 2,676 07-02-2022, 09:24 AM
Last Post: dkebler
  ROCKPRO64 PCI SSD SD-boot Install pspgarret 0 1,116 06-09-2022, 10:56 AM
Last Post: pspgarret

Forum Jump:


Users browsing this thread: 1 Guest(s)