PINE64
Gentoo, Current state, Test Phase - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98)
+--- Forum: Linux on RockPro64 (https://forum.pine64.org/forumdisplay.php?fid=101)
+--- Thread: Gentoo, Current state, Test Phase (/showthread.php?tid=6549)

Pages: 1 2


RE: Gentoo is working - tux_on_tour - 11-26-2018

(11-21-2018, 01:34 PM)khaosgrille Wrote:
(10-26-2018, 05:50 AM)tux_on_tour Wrote: As of friday 26.10.2018 the image has no partition table.
                                                              

Hi,

sorry for no response for such a long time. I forked ayufans building script and will release the first version soon.

It is working right now but i need to clean it up a little bit.
I changed the first post with a bunch of new updates.


Khaosgrille

Thanks for your hard work.

I had up till now only limited success building my own gentoo install as I did not get the network connection to run.
I think that I wait till you made a working version so I can brake it again trying to optimize it.

tux_on_tour


RE: Gentoo is working - khaosgrille - 12-28-2018

Hi,

quick update from me. I had few problems with scripting the last steps. I have given up (quite early honestly) and  done them by hand  and here is an image (https://grmr.de/khaosgrille/gentoo3.img.tar.xz)

I  only made a minimal image without X or any tweaks. If u use a sd card as a medium I strongly recommend using TMPDIR on tmpfs.
SD Cards have not enough space/inodes and compiling several packages in a row is nearly impossible.
(https://wiki.gentoo.org/wiki/Portage_TMPDIR_on_tmpfs)

If everything works fine I will make a bigger announcement in the forum. I would like feedback and hear about things you would like to add.

The /boot dir is currently not quite working in the script (but in the image). Sadly I will be to busy to finish the script.   I just copied the /boot and the /boot/efi/ from ayufans ubuntu^^.

Greetings
Khaosgrille

PS: The image is for 16gb SD cards and is with DHCPCD aswell as the arm/17.0/Desktop profile.
EDIT: username is root and pw is "rock64"


RE: Gentoo, Current state, Test Phase - necrose99 - 06-23-2019

packages.. built... 

arm64 systemd desktop profile used..
http://dpaste.com/29VXCY2.txt 


[/quote]