PINE64
/dev/spidev0,0 on the Rock64 - Does anyone know how to enable it? - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCK64 (https://forum.pine64.org/forumdisplay.php?fid=85)
+--- Forum: Linux on Rock64 (https://forum.pine64.org/forumdisplay.php?fid=88)
+--- Thread: /dev/spidev0,0 on the Rock64 - Does anyone know how to enable it? (/showthread.php?tid=6282)

Pages: 1 2

RE: /dev/spidev0,0 on the Rock64 - Does anyone know how to enable it? - mcerveny - 09-08-2018

Please check connection again. I see GND connected to pin 18 and not pin 20 and other errors.
Do you have 4.2" or 4.2"b/c ?


I modified 4.2" (monochrome) python demo code. Do not press ctrl-c main.py should be done after 35 seconds.

RE: /dev/spidev0,0 on the Rock64 - Does anyone know how to enable it? - Kappuchino - 09-09-2018

It freaking works!!! That is awesome. You are awesome :-)

Normally I don't do work on weekends, but this is so great :-))

I might/will have a couple of context-questions to grasp a few things and with your permission/help I'll write a doc how to use the eInk Displays in general in the following weeks.

Thanks again :-)

RE: /dev/spidev0,0 on the Rock64 - Does anyone know how to enable it? - tllim - 09-09-2018

(09-09-2018, 05:26 AM)Kappuchino Wrote: It freaking works!!! That is awesome. You are awesome :-)

Normally I don't do work on weekends, but this is so great :-))

I might/will have a couple of context-questions to grasp a few things and with your permission/help I'll write a doc how to use the eInk Displays in general in the following weeks.

Thanks again :-)

Looking forward on your doc on eInk display.

RE: /dev/spidev0,0 on the Rock64 - Does anyone know how to enable it? - mytwocentimes - 02-02-2019

(09-09-2018, 05:26 AM)Kappuchino Wrote: It freaking works!!! That is awesome. You are awesome :-)

Normally I don't do work on weekends, but this is so great :-))

I might/will have a couple of context-questions to grasp a few things and with your permission/help I'll write a doc how to use the eInk Displays in general in the following weeks.

Thanks again :-)

K

Did you get to writing up a doc on eInk Displays and the Rock64 ??

Would be great

RE: /dev/spidev0,0 on the Rock64 - Does anyone know how to enable it? - phuzy - 12-05-2019

Thanks to @mcerveny's posts in this thread, I was able to get a waveshare 2.7" e-paper hat working on my Rock64 v2, Armbian.

However, as mentioned above, due to the Rock64 pin out, it does not seem readily possible to utilize the display as a 'hat', as intended... which is a shame.