(04-24-2016, 09:59 AM)jl_678 Wrote: In the first post of this thread, it says that the user ID and password are both ubuntu. Does that work?

Sent from my XT1254 using Tapatalk

(04-19-2016, 08:30 AM)jl_678 Wrote: Okay, sorry that was my misunderstanding then.  I downloaded the image from Longsleep's repository which is linked below.  Is that where you got it?

https://www.stdin.xyz/downloads/people/longsleep/pine64-images/ubuntu/

(05-10-2016, 12:40 PM)harpoo Wrote:

(04-19-2016, 08:30 AM)jl_678 Wrote: Okay, sorry that was my misunderstanding then.  I downloaded the image from Longsleep's repository which is linked below.  Is that where you got it?

https://www.stdin.xyz/downloads/people/longsleep/pine64-images/ubuntu/

Hi,

I have followed the link and installed the latest version (xenial-pine64-bspkernel-20160507-1.img.xz ). I managed to expand the partition to my full sd card and install MATE.

I have managed as well to start in xwindow mode but the system goes really slow and gets frozen sometimes for some seconds. 

I was wondering how is the performance in your experience and if you have any idea why mine is not so good.

Another issue that I am facing is that the edges of the screen are hidden on my monitor and can't see the menu bar.

Any ideas would be much appreciated.

Thanks

(05-10-2016, 12:40 PM)harpoo Wrote: I have managed as well to start in xwindow mode but the system goes really slow and gets frozen sometimes for some seconds. 

(05-13-2016, 06:57 PM)Doom4535 Wrote: What browser are you all using?  Chromium doesn't seem to be in the repositories and firefox crashes... I can use midori (however, I've never really cared fore midori...), and it complains when I just try to use an armhf version of chromium or firefox... did you need to add in some 32 bit arm stuff?

(05-11-2016, 09:15 AM)tkaiser Wrote:

(05-10-2016, 12:40 PM)harpoo Wrote: I have managed as well to start in xwindow mode but the system goes really slow and gets frozen sometimes for some seconds. 

Do the following to confirm the usual problem when one combines a SD card with slow random write performance and a Desktop Linux or Android:

Code:

sudo apt-get install iozone3
iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2

And for a better understanding what's going on/wrong just look through the specific thread: http://forum.pine64.org/showthread.php?tid=191&pid=9042

Quote:Kingston
Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2
Output is in kBytes/sec
Time Resolution = 0.000001 seconds.
Processor cache size set to 1024 kBytes.
Processor cache line size set to 32 bytes.
File stride size set to 17 * record size.
                                                              random    random     bkwd    record    stride                                    
              kB  reclen    write  rewrite    read    reread    read     write     read   rewrite      read   fwrite frewrite    fread  freread
          102400       4     1004     1100     6522     6516     5410      212                                                          
          102400      16     4302     4104    11503    11491

Quote:SanDisk
Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2
Output is in kBytes/sec
Time Resolution = 0.000001 seconds.
Processor cache size set to 1024 kBytes.
Processor cache line size set to 32 bytes.
File stride size set to 17 * record size.
                                                              random    random     bkwd    record    stride                                    
              kB  reclen    write  rewrite    read    reread    read     write     read   rewrite      read   fwrite frewrite    fread  freread
          102400       4     1164     1176     5030     5032     3651      567                        

(04-14-2016, 03:06 PM)damikeh Wrote:

(04-14-2016, 12:19 PM)outkastn8 Wrote:

(04-12-2016, 12:18 PM)damikeh Wrote: Steps to install Ubuntu
I am using a Windows Desktop, so the steps covered here will show that.
 
Pre-Install setup

1. Download the latest image from longsleeps folder (https://www.stdin.xyz/downloads/people/longsleep/pine64-images/ubuntu/)
   
2. Download Win32Imager (https://sourceforge.net/projects/win32diskimager/files/latest/download)
   
3. Have some kind of extraction capabilities (May i suggest 7zip - http://www.7-zip.org)
   
4. Have a Micro SD card (and adapter to enable it to plug into a USB port) ready, at least 8GB (Class 10 if you can)
   
5. Have a decent power supply (at least 2a) and shorter cables are better.
   

Note: Some other images that I’ve tested with (Android and RemixOS) require Phoenix Card to write the image, which isn’t covered here. Please see the other forum/wiki posts.

Setup

1. Extract the image, and Install the Win32Imager somewhere (preferably the same folder!)
   
2. Open Win32imager and write the image to the SD card (ensure you have the SD card selected!)
   
3. Once the write has completed, MAKE SURE you safely remove the USB drive from the PC – not doing so may harm the write process.
   
4. Remove the SD card and put in the Pine64. Ensure you only have the REQUIRED peripherals connected, Keyboard, HDMI, and I would say LAN too, THEN connect the power.
   
5. Let the Pine64 boot. When completed, use username: ubuntu and password: ubuntu to login; it’s also worth mentioning that once you see the login screen, you CAN ssh into the pine64 also, if you so prefer.
   
6. Once logged in, run the following:  /usr/local/sbin/resize_rootfs.sh
   this will resize the / partition to fill the SD card.
   
7. Profit!
   

Congratulations, you should now have a working system.
From here you can install MATE (for a desktop) or carry on in term mode and get using.
I would change the default password asap, and secure it with a ssh key.

If this is helpful to anyone, please let me know. 
I may have a look at doing a video tomorrow if I get time, showing the steps above - if that would be helpful to anyone.

Cheers
dm

Thanks this at least got me to the point of where I had a terminal. But I have no idea how to load MATE or anything else after that lol NOOBE

Hi outkast, 

No worries, maybe I should add that!

There's a script in the /usr/local/sbin folder called install_mate_desktop.sh - run that and it will download all the required for the desktop environment.

to run it try /usr/local/sbin/install_mate_desktop.sh (you may have to use sudo)