PINE64
(ARCHIVED) Debian Jessie Images (3.10.102 BSP Kernel) New Release - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Linux on Pine A64(+) (https://forum.pine64.org/forumdisplay.php?fid=6)
+---- Forum: Debian (https://forum.pine64.org/forumdisplay.php?fid=24)
+---- Thread: (ARCHIVED) Debian Jessie Images (3.10.102 BSP Kernel) New Release (/showthread.php?tid=497)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26


RE: Debian Jessie Images (3.10.65 BSP Kernel) - jl_678 - 06-06-2016

(06-04-2016, 11:50 PM)bob.patterson.500 Wrote: I just received my Pine 64.  I'm trying to create a boot Micro SD card with a Linux image on it.  I tried downloading the image from the Pine 64 web site, but the Pine doesn't see it.  I am working from a Windows 10 workstation and am using Win32 DiskImager.  Is there a Linux distribution that will create a bootable image using Win32 DiskImager?

Hi,

I am not sure what "doesn't see it means."  Are you following this general process?

  1. Download the image
  2. Unzip the image to reveal a .img file
  3. Use Win32 disk imager to write the .img file to a microSD card and verify that it completes properly.
  4. Insert microSD card in Pine and power on the Pine
  5. Ideally, you would plug the pine into a monitor via HDMI to watch the output as it boots.
Are you following that process?  I have used both the Ubuntu and debian images without a single problem and so can verify that they work.  (Countless others have used them as well.)  I am running Win10 as well.


RE: Debian Jessie Images (3.10.65 BSP Kernel) - av1024 - 06-08-2016

Hi!

Looks like an issue with Network Manager in last (3.10.101 kernel) Mate image. May be the same as described on prev page in "no internet" question.

As I can see /etc/resolv.conf is empty after booting (only 'generated by NetworkManager' comment) so no DNS servers available and "Internet doesn't work".

The temporary solution for me is 'echo nameserver 8.8.8.8 | sudo tee -a /etc/resolv.conf'

// Pine64+ 2Gb, Ethernet connection, not logged in to MATE, test from tty/serial console and via ssh


RE: Debian Jessie Images (3.10.65 BSP Kernel) - pribyl.tom - 06-13-2016

Hi,
I have tried Debian Jessie on my Pine64 board and it looks fine. I need to cross-compile my application on x86 (or x86-64) host. Is it possible to download toolchain?
Thanks.
T.


RE: Debian Jessie Images (3.10.65 BSP Kernel) - benpope81 - 06-13-2016

(06-13-2016, 01:34 AM)pribyl.tom Wrote: Hi,
I have tried Debian Jessie on my Pine64 board and it looks fine. I need to cross-compile my application on x86 (or x86-64) host. Is it possible to download toolchain?
Thanks.
T.
You'll need to describe your host platform, but something like this: https://packages.debian.org/sid/amd64/g++-5-aarch64-linux-gnu


RE: Debian Jessie Images (3.10.65 BSP Kernel) - pribyl.tom - 06-13-2016

(06-13-2016, 01:59 AM)benpope81 Wrote:
(06-13-2016, 01:34 AM)pribyl.tom Wrote: Hi,
I have tried Debian Jessie on my Pine64 board and it looks fine. I need to cross-compile my application on x86 (or x86-64) host. Is it possible to download toolchain?
Thanks.
T.
You'll need to describe your host platform, but something like this: https://packages.debian.org/sid/amd64/g++-5-aarch64-linux-gnu

host: Ubuntu 14.04.4 LTS on i686 (uname -a: Linux ip-dev-2u 3.13.0-85-generic #129-Ubuntu SMP Thu Mar 17 20:50:41 UTC 2016 i686 i686 i686 GNU/Linux)

target: Pine64 board with Debian Jessie


RE: Debian Jessie Images (3.10.65 BSP Kernel) - benpope81 - 06-13-2016

(06-13-2016, 06:26 AM)pribyl.tom Wrote: host: Ubuntu 14.04.4 LTS on i686 (uname -a: Linux ip-dev-2u 3.13.0-85-generic #129-Ubuntu SMP Thu Mar 17 20:50:41 UTC 2016 i686 i686 i686 GNU/Linux)

target: Pine64 board with Debian Jessie

There's this, which should do the job: https://launchpad.net/ubuntu/trusty/+package/g++-aarch64-linux-gnu

I don't have a trusty install to hand, but:
sudo apt-get install g++-aarch64-linux-gnu

If you want to build it yourself from source, I think:
sudo apt-get build-dep g++-aarch64-linux-gnu
apt-get -t trusty -b source g++-aarch64-linux-gnu


RE: Debian Jessie Images (3.10.65 BSP Kernel) - UnixOutlaw - 06-19-2016

Can someone please clear up the massive spaghetti that is all the different variants and locations to locate and download debian images from?

There seems to be like 5 different places, all with conflicting information... There's the pine "shop" web pages with downloads, there pine.pro, there's sun-xi - and there's more...

This one https://www.pine64.pro/downloads/ "seems" to have more stuff and more "updates" than some of the others - however - under Debian Jessie - there are two "base" images - but different sizes, but both dated 8th April.

Can I assume that the wrong date was put against the "larger" one and that it is in fact later than 04/08/2016?


RE: Debian Jessie Images (3.10.65 BSP Kernel) - Blunt21 - 06-20-2016

Hi !

After some research I've come to understand that it may be possible to run packages built for armv7l on a linux built for armv8 basically running 32bit on a 64bit linux.

I believe this would require some change regarding the rootfs but that's as far as I got, I don't seem to find any more information on the matter.

My problem is that I would like to use my Pine64 to build a MagicMirror2 and this requires electron which isn't built for arm64/armv8. At first I thought about cross-compiling electron for arm64 but this seems to be quite difficult too for the newbie that I am.

So my questions are : Is this possible ? and if so how should I proceed ?

(P.S.: Thank you for your hard work, Debian runs like a charm on the Pine64+ that I have Smile )


RE: Debian Jessie Images (3.10.65 BSP Kernel) - lenny.raposo-pine64.pro - 06-20-2016

The Images are pretty much what people want. The Debian Mate And XFCE images are the latest (and currently stable) I am have another set that will be released upon receipt of the Mali driver for the pine.

Pine64.pro is a work in progress as things are a bit busy in my personal life from time to time.

As for the multiarch (32 and 64bit) try sudo dpkg --add-architecture armhf


RE: Debian Jessie Images (3.10.65 BSP Kernel) - fishmech - 06-20-2016

(06-20-2016, 06:16 PM)lenny.raposo-pine64.pro Wrote: The Images are pretty much what people want. The Debian Mate And XFCE images are the latest (and currently stable) I am have another set that will be released upon receipt of the Mali driver for the pine.

Pine64.pro is a work in progress as things are a bit busy in my personal life from time to time.

As for the multiarch (32 and 64bit) try sudo dpkg --add-architecture armhf

What will be the best way to transfer current programs/settings/etc when upgrading to the new images, when available?

Thanks for the work you do.