+- PINE64 (https://forum.pine64.org)
+-- Forum: General (https://forum.pine64.org/forumdisplay.php?fid=1)
+--- Forum: News (https://forum.pine64.org/forumdisplay.php?fid=2)
+--- Thread: First images with DRM and Mali support for A64 (/showthread.php?tid=4749)
RE: First images with DRM and Mali support - Vidiot - 08-12-2017
I have problems with the Wi-Fi on this particular distribution. The system claims Wi-Fi is enabled and working but does not recognize any available networks (and adding the SSID and Passkey under network configuration does not make a difference). The system runs great for me otherwise. Video runs smoother than earlier ubuntu, and distro seems pretty responsive.
I have been using a Pi3 as a Squeezebox player, but I was hoping the Pine64 Wi-Fi might work better, It would be nice to get the wi-fi working and get squeezelite functional to test out if the Pine64 works better for a player...
RE: First images with DRM and Mali support - Wizzard - 08-15-2017
Now I tried to boot newly flashed 0.7.7 image and it really does not boot, the LED just blinks. When I removed the SD card, it booted from internal storage. Seems that new images are really a little strange.
RE: First images with DRM and Mali support - rookieone - 08-22-2017
I was wondering what the practical use cases are now that we have Mali on Linux. Does anyone have an overview?
RE: First images with DRM and Mali support - Luke - 08-22-2017
(08-22-2017, 10:21 AM)rookieone Wrote: I was wondering what the practical use cases are now that we have Mali on Linux. Does anyone have an overview?
pretty much this
RE: First images with DRM and Mali support - ayufan - 08-23-2017
New goodie: https://github.com/ayufan-pine64/linux-build/releases/tag/0.7.10. It fixed suspend/resume on non-sunxidrm drivers, making the 0.7.x actually useable as you can switch to Mali when needed.
RE: First images with DRM and Mali support - sportcanon - 09-19-2017
(08-23-2017, 12:00 PM)ayufan Wrote: New goodie: https://github.com/ayufan-pine64/linux-build/releases/tag/0.7.10. It fixed suspend/resume on non-sunxidrm drivers, making the 0.7.x actually useable as you can switch to Mali when needed.
Hi, I have no success on booting images version 0.7.13, 0.7.14 with my pine64+(2GB) Using the image 0.7.12 and then updating seems to be without problems. The image I do use is: xenial-minimal-pine64-bspkernel-0.7.1*-***.img.xz
Someone experiencing same issue?
(09-19-2017, 01:24 AM)sportcanon Wrote: Hi, I have no success on booting images version 0.7.13, 0.7.14 with my pine64+(2GB) Using the image 0.7.12 and then updating seems to be without problems. The image I do use is: xenial-minimal-pine64-bspkernel-0.7.1*-***.img.xz
Someone experiencing same issue?
Just small correction - updating to higher then 0.7.12 also causes no booting to system. Previously I was in fact downgrading because I did not specify version.
RE: First images with DRM and Mali support - ayufan - 09-20-2017
Thanks. I will verify that later. We had some troubles and tried some fixes for eMMC module.
RE: First images with DRM and Mali support - jkmooney - 09-29-2017
Been a while since I've been on these boards. Still have my A64 2GB, Gonna have to give this a try..... something tells me I'm going to owe Ayunfan and Lenny a beer
RE: First images with DRM and Mali support - Pushpike - 12-17-2017
Hello Ayufan!
Its been more than 2 months since the last update. Is the development of these images dead?
We are waiting for a stable image with DRM and Mali support for Pine64.
Thank you.
RE: First images with DRM and Mali support - tllim - 12-20-2017
Good news, Allwinner BU3 just release A64 MALI-400 64 bit Wayland driver to Pine64. Here is the link: http://wiki.pine64.org/index.php/Mali_Driver#Mali-400_64-bit_driver