+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Pine A64 Hardware, Accessories and POT (https://forum.pine64.org/forumdisplay.php?fid=32)
+---- Forum: Enclosures (https://forum.pine64.org/forumdisplay.php?fid=14)
+---- Thread: Super Mario case [NOW WITH UPDATED STL-FILE (April 27.)] (/showthread.php?tid=281)
RE: Super Mario case - CaptainZalo - 04-08-2016
(04-08-2016, 01:56 PM)Tarjei85 Wrote:(04-07-2016, 03:06 PM)CaptainZalo Wrote: Just got my board today. I'm eagerly looking forward to getting my filthy hands on that STL-file, and I was thinking about running it through a lasercutter and make the whole thing in laquered wood.
And its done... Here is the stl file. No guaranties that it is without error. I dont have the tools to check it. This is one file for the whole thing (exploded so none of the sides is in contact with each other.
If it is preferable I can generate individual STL files for each side...
Here is the file!
*Keep in mind that the scaling of this model is in mm
Sweet. I sent you a mail. If you're interrested, pop me one back.
RE: Super Mario case [NOW WITH STL-FILE] - Tarjei85 - 04-10-2016
And than I have updated the STL file to allso contain spacer for the Pine board. The spacers are 4mm in height so you end up wit a 1mm clearance in the area of the mounting brackets for the sidepanels.
Just use the link I posted earlier (I did overwrite the old file)
RE: Super Mario case [NOW WITH STL-FILE] - CaptainZalo - 04-12-2016
I get "Item might not exist or is no longer available" message. Would you mind checking the share settings and link in your original post, mate?
RE: Super Mario case [NOW WITH STL-FILE] - Tarjei85 - 04-12-2016
Will do. I got my pine yesterday and found out I will need to raise the cutouts to get more free space underneath the pine (for the soldering points) so I will come back here when its done and the file is reposted
RE: Super Mario case [NOW WITH STL-FILE] - CaptainZalo - 04-12-2016
(04-12-2016, 03:47 AM)Tarjei85 Wrote: Will do. I got my pine yesterday and found out I will need to raise the cutouts to get more free space underneath the pine (for the soldering points) so I will come back here when its done and the file is reposted
Grats! W00t!
Looking forward to pictures of the case once we get them printed/etched.
RE: Super Mario case [NOW WITH STL-FILE] - CaptainZalo - 04-18-2016
Any news on the finished STL-file? I got a mate ready with plywood and a lasercutter. ;-)
RE: Super Mario case [NOW WITH STL-FILE] - DarkstarSA - 04-26-2016
(04-12-2016, 02:29 AM)CaptainZalo Wrote: I get "Item might not exist or is no longer available" message. Would you mind checking the share settings and link in your original post, mate?
I stumbled across this conversation. And I'm so glad I did. This case looks awesome, I am still waiting for my Pine to arrive but my 3d printer would love to give this print a bash.
I'm using my Pine as an IoT hub so that cube would look so cool.... pending what the fiancé says
. In any case, thanks for sharing and also looking forward to the STL
RE: Super Mario case [NOW WITH STL-FILE] - Tarjei85 - 04-26-2016
I will try to finish the model tonight and post the STL late tonight/tomorrow morning.
Thank you DarkstarSA for the kind words. The only request I have for people using my STL is that you all post pictures of it when it is finnished
RE: Super Mario case [NOW WITH STL-FILE] - DarkstarSA - 04-26-2016
(04-26-2016, 04:53 AM)Tarjei85 Wrote: I will try to finish the model tonight and post the STL late tonight/tomorrow morning.
Thank you DarkstarSA for the kind words. The only request I have for people using my STL is that you all post pictures of it when it is finnished
No stress on getting it done, I know its your own time doing this and I do appreciate it.
I'll most definitely post pictures when it is done
RE: Super Mario case [NOW WITH STL-FILE] - Tarjei85 - 04-26-2016
And finally the new, updated STL file is ready (only took me an hour, but its 00:30 here now, and its up again for work at 04:30, so now its good night to you all.
The new updates is raising the cutouts with 5mm so there is room for the soldering points and pins underneath the Pine.
I have also raised the spacers with 5mm to match the cutouts.
BE AWARE!!! I have not checked the STL (running Windows 8.1 on this machine
) so If anyone want to check the STL and if necessary fix it (I know the built in STL software in Windows 10 can do this) and then PM me the file I will update the GDrive file right away.Sorry for all the delay on this update. It has been a crazy couple of weeks lately.
And last.... HERE is the STL file
